Accessing the Host Console
This section provides information on the different methods of accessing the host console of an HP Integrity server.
This section addresses the following topics:
•“Accessing the iLO 2 MP With the Web Browser” (page 91)
•“Accessing the Host Console With the TUI - CO Command” (page 92)
•“Accessing the Host Console With vKVM - Integrated Remote Console” (page 93)
•“Accessing the Host Console with the SMASH SM CLP” (page 93)
•“Accessing the Graphic Console Using VGA ” (page 93)
Accessing the iLO 2 MP With the Web Browser
Web browser access is an embedded feature of the iLO 2 MP.
The iLO 2 MP has a separate LAN port from the system LAN port. It requires a separate LAN drop, IP address, and networking information from that of the port used by the operating system.
IMPORTANT: Make sure you use the MAC address to the iLO 2 MP LAN and not the MAC address to the server core LAN.
Before starting this procedure, you must have the following information:
•IP address for the iLO 2 MP LAN
•Host name (this is used when messages are logged or printed)
To interact with the iLO 2 MP through the Web GUI, follow these steps:
1.Open a Web browser and enter the host name or the IP address for the iLO 2 MP.
2.Log in using your user account name and password at the login page. (Figure
Figure
Accessing the Host Console | 91 |