Manuals / Proxim / Computer Equipment / Network Router

Proxim AP-700 manual Advanced Bridging Functions, Medium Access Control MAC Functions, 206

Models: AP-700

1 221

Download 221 pages 11.69 Kb

Page 206

Specifications	AP-700 User Guide
Software Features

Advanced Bridging Functions

Feature	Supported by
	AP-700
IEEE 802.1d Bridging	3
WDS Relay	3
Roaming	3
Protocol Filtering	3
Multicast/Broadcast Storm Filtering	3
Proxy ARP	3
TCP/UDP Port Filtering	3
Blocking Intra BSS Clients	3
Packet Forwarding	3

Medium Access Control (MAC) Functions

Feature	Supported by
	AP-700
Automatic Channel Selection (ACS)	3
Dynamic Frequency Selection (DFS)*	3
Closed System Feature	3
Wireless Service Shutdown	3
802.11d Support	3
TX Power Control	3
Wireless Multimedia Enhancements/Quality of Service	3
(QoS)

*DFS is required for 802.11a APs certified in the ETSI regulatory domain and operating in the middle frequency band. When ACS is disabled, available channels are limited to those in the lower frequency band. See Dynamic Frequency Selection/Radar Detection (DFS/RD).

Security Functions

Feature	Supported by
	AP-700
Security Profiles per VLAN	3
RADIUS Profiles per VLAN	3
IEEE 802.11 WEP*	3
MAC Access Control	3
RADIUS MAC-based Access Control	3
IEEE 802.1x Authentication†	3
Multiple Authentication Server Support per VLAN‡	3
Rogue Scanning to Detect Rogue Access Points and Clients	3
Per User Per Session (PUPS) Encryption §	3
Wi-Fi Protected Access (WPA)	3
Hardware Configuration Reset Disable	3

* Key lengths supported by 802.11a: 64-bit, 128-bit, and 152-bit. Key lengths supported by 802.11b: 64-bit and 128-bit.

Key lengths supported by 802.11b/g: 64-bit, 128-bit, and 152-bit.

† EAP-MD5, EAP-TLS, EAP-TTLS, and PEAP client supplicant supported.

206

Image 206

Proxim AP-700 manual Advanced Bridging Functions, Medium Access Control MAC Functions, Security Functions, 206

Contents

ORiNOCO AP-700 Access Point User Guide OpenSSL License Note CopyrightTrademarks AP-700 User GuideContents Contents AP-700 User Guide ManagementMonitoring CommandsTroubleshooting Command Line Interface CLI General NotesTechnical Support Ascii Character Chart C SpecificationsStatement of Warranty Regulatory ComplianceAP-700 User Guide Document Conventions Introduction to Wireless NetworkingIntroduction Introduction AP-700 User Guide Ieee 802.11 SpecificationsGuidelines for Roaming HTTP/HTTPS Interface Command Line InterfaceManagement and Monitoring Capabilities SNMPv3 Secure Management Snmp ManagementSSH Secure Shell Management Page Overview Installation and InitializationAP-700 Hardware Description External Antennas Installation and Initialization AP-700 User GuideAntennas LED Indicators Active EthernetPrerequisites Installation and Initialization AP-700 User Guide Product Package System RequirementsCabling the AP-700 Hardware InstallationRequired Materials Mounting the AP-700 to a Ceiling Installing the Security CoverMounting the AP-700 Installing External Antennas AP-700 Mounting Plate Mounting the AP-700 to a WallInstalling the AP in a Plenum Opening the Antenna CompartmentScanTool Instructions Using ScanToolInitialization Scan List Logging Click LAN SettingsEnter Network Password screen appears Select Tools Internet OptionsUsing the Setup Wizard 11 System Status Screen12 Setup Wizard Setup Wizard Instructions Installing the Software Install Software with Http Interface Click Commands Update AP via HttpClick Commands Reboot Install Software with Tftp ServerInstall Updates from your Tftp Server using the CLI Related TopicsSystem Status System Status ScreenAdvanced Configuration Advanced Configuration AP-700 User Guide Configure Main ScreenSystem Dynamic DNS SupportPage IP Configuration NetworkAdvanced Dhcp ServerDNS Client Comment optional Advanced Configuration AP-700 User Guide NetworkStart IP Address End IP Address Dhcp Relay Agent Dhcp Relay Agent Dhcp Server IP Address TableLink Integrity Target IP Address Comment optionalLink Integrity Configuration Screen Sntp Simple Network Time ProtocolSntp Configuration Screen Advanced Configuration AP-700 User Guide Network Operational Mode InterfacesConfiguring 802.11d Support Advanced Configuration AP-700 User Guide InterfacesSuper Mode and Turbo Mode Ieee 802.11d Support for Additional Regulatory DomainsTX Power Control/Transmit Power Level Configuring TX Power ControlWireless 802.11a/b/g Radio 10 Wireless InterfacePage Dynamic Frequency Selection/Radar Detection DFS/RD Affected CountriesWireless Service Status RTS/CTS Medium ReservationSet Blacklist Status to Enable Traps Generated During Wireless Service Shutdown and ResumeClick on Configure Interfaces Wireless Channel Blacklist Table13 WDS Example Bridging WDSWDS Setup Procedure 14 WDS ConfigurationEthernet 15 Adding WDS Links16 Ethernet Sub-tab Passwords ManagementSecure Management IP Access TableServices Http Access Advanced Configuration AP-700 User Guide ManagementSnmp Settings Https Access Secure Socket Layer17 Management Services Configuration Screen SSH Clients SSH Session SetupConfiguring SSH Click Commands Update AP via Http or via Tftp Uploading Externally Generated Host KeysSerial Configuration Settings Radius Based Management AccessSet up Automatic Configuration for Static IP Automatic Configuration AutoConfigAuto Configuration and the CLI Batch File 19 Automatic Configuration Screen Set up Automatic Configuration for Dynamic IPHardware Configuration Reset Chrd 20 Dhcp Options Setting the Boot Server Host NameClick Configure Management Chrd Configuration Reset via Serial Port During BootupConfiguring Hardware Configuration Reset Procedure to Reset Configuration via the Serial Interface Static MAC FilteringEthernet Protocol Select the Filter Operation TypeAdvanced Configuration AP-700 User Guide Filtering Wired MAC Address Wired MAC Address 0040F41CDB6AWireless MAC Address 00022D5194E4 Wireless MAC Address 0020A6124E38Number AdvancedTCP/UDP Port Click Add under the TCP/UDP Port Filter Table headingEditing TCP/UDP Port Filters Click Edit under the TCP/UDP Port Filter Table headingAlarms GroupsSecurity Trap Group Trap Name Description Severity Level Operational Trap Group Trap Name Description Severity LevelTrap Name Description Severity Level Flash Memory Trap Group Trap Name Description Severity LevelImage Trap Group Trap Name Description Severity Level Alarm Host TableTftp Trap Group Trap Name Description Severity Level Sntp Trap Group Trap Name Description Severity LevelAdvanced Configuration AP-700 User Guide Alarms Event Priority Description Configuring Syslog Event NotificationsSyslog Syslog Messages Syslog Message Name Priority Severity DescriptionAdvanced Configuration AP-700 User Guide Rogue Scan 25 Preventing Rogue AP AttacksMulti-Band Scanning Continuous Scanning ModeBackground Scanning Mode Rogue Scan Data CollectionClick Configure Alarms Rogue Scan Rogue Scan26 Rogue Scan Screen Bridge Spanning TreeAdvanced Configuration AP-700 User Guide Bridge Storm ThresholdPacket Forwarding Configuring Interfaces for Packet ForwardingIntra BSS QoS Wireless Multimedia Extensions WME/Quality of Service QoSClick Configure QoS Policy Enabling QoS and Adding QoS policiesAdvanced Configuration AP-700 User Guide QoS Enter the Priority Mapping IndexClick Configure QoS Priority Mapping Priority MappingEnhanced Distributed Channel Access Edca STA Edca Table and AP Edca Table32 Edca Tables Advanced Configuration AP-700 User Guide QoS Radius Servers per Authentication Mode and per Vlan Radius ProfilesConfiguring Radius Profiles Radius Servers Enforcing Vlan Access ControlAdvanced Configuration AP-700 User Guide 35 Add Radius Server Profile Radius Accounting MAC Access Control Via Radius Authentication802.1x Authentication using Radius 101 Authentication AttributesAccounting Attributes 102 103 SSID/VLAN/SecurityVlan Overview 104 Click Configure SSID/VLAN/Security Mgmt Vlan Typical User Vlan ConfigurationsControl Access to the AP Management VlanSecurity Profile Provide Access to a Wireless Host in the Same WorkgroupDisable Vlan Tagging Wi-Fi Protected Access WPA/802.11i WPA2 Advanced Configuration AP-700 User Guide SSID/VLAN/SecurityAuthentication Process 107Authentication Protocol Hierarchy 108VLANs and Security Profiles Configuring Security ProfilesClick Configure SSID/VLAN/Security Security Profile 109802.1x Station Non Secure StationWEP Station WPA Station111 40 Security Profile Table Add Entries 112 113 MAC AccessWireless Configuring an SSID/VLAN with Vlan Tagging Disabled 11443 SSID/VLAN Edit Entries Screen Vlan Tagging Disabled 115116 Configuring SSID/VLANs with Vlan Tagging EnabledClick SSID/VLAN/Security Wireless 45 SSID/VLAN Edit Entries Screen Vlan Tagging Enabled 117Broadcast Ssid and Closed System 118Monitoring 119Version Monitoring AP-700 User GuideIP/ARP Table Icmp Monitoring TabLearn Table Learn Table Monitoring TabRadius 124 Monitoring AP-700 User Guide Interfaces 125126 Station Statistics 127Monitoring AP-700 User Guide Station Statistics 128129 CommandsIntroduction to File Transfer via Tftp or Http Http File Transfer Guidelines Image Error Checking During File TransferTftp File Transfer Guidelines 130Commands AP-700 User Guide Update APUpdate AP via Tftp 131132 Update AP via HttpCommands AP-700 User Guide Update AP via Http Retrieve File via Tftp Commands AP-700 User Guide Retrieve FileRetrieve File 133Retrieve File via Http 134Retrieve File via Http Command Screen Commands AP-700 User Guide Reboot RebootReset 13 Help Link Configuration Screen 137 Help LinkSymptoms and Solutions TroubleshootingTroubleshooting Concepts Connectivity IssuesBasic Software Setup and Configuration Problems Client Connection Problems Vlan Operation Issues Active Ethernet AEForced Reload Procedure Recovery ProceduresReset to Factory Default Procedure Preparing to Download the AP Image Download a New Image Using ScanToolDownload Procedure 143Download a New Image Using the Bootloader CLI 144Hardware and Software Requirements Setting IP Address using Serial PortInitializing the IP Address using CLI Attaching the Serial Port CableTftp Server Radius Authentication ServerRelated Applications 146Troubleshooting AP-700 User Guide Related Applications 147Prerequisite Skills and Knowledge Command Line Interface CLIGeneral Notes Notation ConventionsCLI Error Messages Navigation and Special KeysCommand Line Interface CLI AP-700 User Guide Command Line Interface CLI VariationsBootloader CLI 150Example 1. Display Command list CLI Command TypesOperational CLI Commands Example 3a. Display every parameter that can be changed Example 2. Display specific CommandsExample 3. Display parameters for set and show Done, exit, quit Example 3b. Display parameters based on letter sequenceExample 4. Display Prompts for Successive Parameters DownloadPasswd HelpHistory 154Search Parameter Control CommandsShow CLI Command 155Set and show Command Examples Set CLI CommandConfiguring Objects that Require Reboot ExamplesExample 2 Create a table entry or row Example 1 Set the Access Point IP Address ParameterExample 4 Enable, Disable, or Delete a table entry or row Example 3 Modify a table entry or row158 Example 5 Show the Group ParametersExample 6 Show Individual and Table Parameters Working with Tables Using Tables and StringsUsing Strings 159Log into the AP using HyperTerminal Configuring the AP using CLI commandsSet Basic Configuration Parameters using CLI Commands Log into the AP using TelnetSet System Name, Location and Contact Information Change PasswordsSet Network Names for the Wireless Interface 161Country Code 162Configure SSIDs Network Names, VLANs, and Profiles 163Backup your AP Configuration File Other Network SettingsDownload an AP Configuration File from your Tftp Server Set up Auto ConfigurationConfigure the AP as a Dhcp Server Configure the DNS ClientAutochannel Select ACS Operational ModeEnable/Disable Closed System Enable/Disable Turbo Mode 802.11a/g only Shutdown/Resume Wireless ServiceEnable/Disable Super Mode 802.11a/g only Configure Antenna DiversitySet Communication Ports Edit Management IP Access TableConfigure Management Ports Configure Serial Port Interface Configure Secure Socket Layer HttpsSet Telnet Session Timeouts 169Setup MAC Address Access Control Create/Enable WDSEnable/Disable WDS Add an Entry to the MAC Access Control TableFigure A-17 Result of showradiustbl CLI Command 171 Add a Entry to the Wifssid Table Enable Vlan ManagementDisable Vlan Management CLI Monitoring Parameters Parameter Tables 174Filtering Parameters 175System Parameters Name Type Value Access CLI ParameterSet sysresettodefaults 176Network Parameters DNS Client for Radius Name ResolutionDhcp Server Parameters Name Type Value Access CLI Parameter 177Dhcp Relay Server Table Dhcp Server table for IP poolsDhcp Relay Group 178179 Sntp Parameters Name Type Value Access CLI ParameterLink Integrity IP Target Table Common Parameters to 802.11a/b/g Wireless Interface ParametersInterface Parameters 180802.11a Only Parameters 181182 802.11b Only Parameters802.11b/g Only Parameters For 802.11b-only For 802.11g-only modeFor 802.11b/g mode ModeChannel Blacklist Parameters Wireless Distribution System WDS ParametersWireless Interface SSID/VLAN/Profile Parameters 184Management Parameters Wireless Distribution System WDS Security Table ParametersSnmp Parameters Name Type Value Access CLI Parameter 185186 187 Http Parameters Name Type Value Access CLI ParameterTelnet Parameters Name Type Value Access CLI Parameter SSH Parameters Serial Port Parameters Name Type Value Access CLI ParameterRadius Based Management Access Parameters 188189 IP Access Table ParametersTftp Server Parameters 190 Filtering ParametersEthernet Filtering Table TCP/UDP Port Filtering Table Proxy ARP Parameters Name Type Value Access CLI ParameterTCP/UDP Port Filtering 191Snmp Table Host Table Parameters Alarms ParametersName Type Value Access CLI Parameter Syslog Group 192 Syslog ParametersSyslog Host Table 193194 Bridge ParametersSpanning Tree Priority and Path Cost Table Packet Forwarding Parameters Storm Threshold TableIntra BSS Subscriber Blocking 195General Radius Parameters Radius Server Configuration ParametersRadius Parameters 196MAC Access Control Table Security Parameters198 VLAN/SSID ParametersSecurity Profile Table Configuring QoS Policies Iapp Parameters Name Type Value Access CLI ParameterEnabling QoS Name Type Value Access CLI Parameter Other ParametersSpecifying the Mapping between 802.1p and 802.1D Priorities 200201 Defining the QoS Policy used for a Wireless Interface SsidCLI Batch File CLI Batch File Format and Syntax Auto Configuration and the CLI Batch FileReboot Behavior CLI Batch File Error Log 203Charact Equival Ent 204 Ascii Character ChartHex Number of Stations per BSS SpecificationsSoftware Features Management FunctionsAdvanced Bridging Functions Medium Access Control MAC FunctionsSpecifications AP-700 User Guide Software Features Security Functions207 Specifications AP-700 User GuideNetwork Functions Hardware Specifications 802.11b/g 802.11a Mode Frequency Channel Product SKU BandAvailable Channels Upper 149 153 157 161 ISM Band 165210 RF Performance802.11a RF Performance 802.11a Data Rates Mbps Software and Documentation Downloads Knowledgebase 211 Technical SupportOnline Support International 212 Telephone SupportTechnical Support AP-700 User Guide Telephone Support Repair or Replacement Statement of WarrantyWarranty Coverage Limitations of WarrantySearch Knowledgebase Ask a Question or Open an IssueOther Information Other Adapter Cards215 Regulatory ComplianceProduct Model Numbers 216 Safety Information USA, Canada, & European UnionRegulatory Compliance AP-700 User Guide Federal Communications Commission FCC 217Modifications 218Industry Canada IC 219European Union 220221 Regulatory Compliance Certifications SummaryCountry Certification/Reference No