Proxim AP-700 Example 5 Show the Group Parameters, Example 6 Show Individual and Table Parameters

Command Line Interface (CLI)	AP-700 User Guide
CLI Command Types
Example 5 - Show the Group Parameters
This example illustrates how to view all elements of a group or table.
Syntax:
[Device-Name]>show <group name>
Example:
[Device-Name]>show network

The CLI displays network group parameters. Note show network and show ip return the same data.

Figure A-10 Results of “show network” and “show ip” CLI Commands

Example 6 - Show Individual and Table Parameters

1. View a single parameter. Syntax:

[Device-Name]>show <parameter name>

Example:

[Device-Name]> show ipaddr

Displays the Access Point IP address.

Figure A-11 Result of “show ipaddr” CLI Command

2. View all parameters in a table. Syntax:

[Device-Name]>show <table name>

Example:[Device-Name]>show mgmtipaccesstbl

The CLI displays the IP Access Table and its entries.

158