Proxim AP-700 manual Syslog Messages, Syslog Message Name Priority Severity Description

Advanced Configuration	AP-700 User Guide
Alarms

•Syslog Lowest Priority Logged: The AP will send event messages to the Syslog server that correspond to the selected priority number and any priority numbers below it. For example, if set to 6, the AP will transmit event messages labeled priority 0 to 6 to the Syslog server. This parameter supports a range between 0 and 7; 6 is the default.

•Syslog Heartbeat Status: When Heartbeat is enabled, the AP periodically sends a message to the Syslog server to indicate that it is active.

•Syslog Heartbeat Interval: If Syslog Heartbeat Status is enabled this field provides the interval for the heartbeat in seconds (between 1 and 604800). The default is 900 seconds.

•Syslog Host Table: This table specifies the IP addresses of a network servers that the AP will send Syslog messages to. Click Add to create a new entry. Click Edit to change an existing entry. Each entry contains the following field:

–IP Address: Enter the IP Address for the management host.

–Comment: Enter an optional comment such as the host name.

–Status: The entry is enabled automatically when saved (so the Status field is only visible when editing an entry). You can also disable or delete entries by changing this field’s value.

Syslog Messages

The following messages are supported in the AP:

Syslog Message Name	Priority	Severity	Description
Auto Configuration using DHCP	6	Informational	Configuration filename and TFTP server address
			are obtained from DHCP when dynamic IP is
			configured on the device.
Auto Configuration using Static IP	6	Informational	Configured TFTP server address and configuration
			filename is used when Static IP is configured on
			the device.
TFTP Server IP and configuration	4	Minor	Configuration filename and/or TFTP server
filename not present in DHCP			address is not present in the DHCP response when
response			using DHCP.
TFTP Server IP Address used in	6	Informational	TFTP server IP address used for AutoConfig.
AutoConfig feature
TFTP Server filename used in	6	Informational	TFTP filename used for AutoConfig.
AutoConfig feature
Auto Configuration TFTP	4	Minor	TFTP download of a configuration file for
Download Failure			AutoConfig fails for the following reasons:
			Incorrect or non-reachable TFTP server address
			Incorrect or unavailable configuration filename
			TFTP transfer timeout.
Image Compatibility Check,	2	Major	One of the following failures occurs:
Invalid Image			Invalid Signature
			Zero File Size
			Large File
			Non VxWork Image
			Incompatible Image
AP Heartbeat Status	5	Informational	AP syslog keep alive message.

81