Safety Information USA, Canada, & European Union | Proxim AP-700

Regulatory Compliance

AP-700 User Guide

Safety Information (USA, Canada, & European Union)

Safety Information (USA, Canada, & European Union)

This product has been evaluated to, and complies with, the Safety requirements of UL60950:2000, and IEC60950:1999; the Standards for the Safety of Information Technology Equipment. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

•This product is for indoor use only.

•Operate and install this product as described in this manual. This device must be installed and used in strict accordance with the manufacturer's instructions.

•This product is suitable for installation in air handling spaces (plenum).

•Use only the AC/DC power supply adapter provided. For replacement, contact your local supplier or distributor.

•To avoid the risk of electric shock from lightning, do not use this product during an electrical storm.

•Installation of this product must conform to local regulations and codes.

•When using this product with an external antenna, see the installation documentation provided with the antenna system.

•No user serviceable parts; all repairs and service must be handled by a qualified service center.

216

Image 216

Proxim manual Safety Information USA, Canada, & European Union, Regulatory Compliance AP-700 User Guide, 216

Contents

ORiNOCO AP-700 Access Point User Guide Copyright TrademarksOpenSSL License Note AP-700 User Guide Contents Contents AP-700 User Guide Management Commands TroubleshootingMonitoring Command Line Interface CLI General Notes Ascii Character Chart C Specifications Statement of WarrantyTechnical Support Regulatory Compliance AP-700 User Guide Introduction to Wireless Networking IntroductionDocument Conventions Ieee 802.11 Specifications Guidelines for RoamingIntroduction AP-700 User Guide Command Line Interface Management and Monitoring CapabilitiesHTTP/HTTPS Interface Snmp Management SSH Secure Shell ManagementSNMPv3 Secure Management Page Installation and Initialization AP-700 Hardware DescriptionOverview Installation and Initialization AP-700 User Guide AntennasExternal Antennas LED Indicators Active Ethernet Prerequisites Installation and Initialization AP-700 User Guide Product Package System Requirements Hardware Installation Required MaterialsCabling the AP-700 Installing the Security Cover Mounting the AP-700Mounting the AP-700 to a Ceiling Installing External Antennas AP-700 Mounting Plate Mounting the AP-700 to a Wall Installing the AP in a Plenum Opening the Antenna Compartment Using ScanTool InitializationScanTool Instructions Scan List Click LAN Settings Enter Network Password screen appearsLogging Select Tools Internet Options Using the Setup Wizard 11 System Status Screen 12 Setup Wizard Setup Wizard Instructions Installing the Software Install Software with Http Interface Click Commands Update AP via Http Click Commands Reboot Install Software with Tftp Server Install Updates from your Tftp Server using the CLI Related Topics System Status System Status Screen Advanced Configuration Advanced Configuration AP-700 User Guide Configure Main Screen System Dynamic DNS SupportPage IP Configuration Network Dhcp Server DNS ClientAdvanced Advanced Configuration AP-700 User Guide Network Start IP Address End IP AddressComment optional Dhcp Relay Agent Dhcp Relay Agent Dhcp Server IP Address Table Link Integrity Target IP Address Comment optional Link Integrity Configuration Screen Sntp Simple Network Time Protocol Sntp Configuration Screen Advanced Configuration AP-700 User Guide Network Operational Mode Interfaces Advanced Configuration AP-700 User Guide Interfaces Super Mode and Turbo ModeConfiguring 802.11d Support Ieee 802.11d Support for Additional Regulatory Domains TX Power Control/Transmit Power Level Configuring TX Power Control Wireless 802.11a/b/g Radio 10 Wireless InterfacePage Dynamic Frequency Selection/Radar Detection DFS/RD Affected Countries Wireless Service Status RTS/CTS Medium Reservation Traps Generated During Wireless Service Shutdown and Resume Click on Configure Interfaces WirelessSet Blacklist Status to Enable Channel Blacklist Table 13 WDS Example Bridging WDS WDS Setup Procedure 14 WDS Configuration Ethernet 15 Adding WDS Links 16 Ethernet Sub-tab Passwords Management IP Access Table ServicesSecure Management Advanced Configuration AP-700 User Guide Management Snmp SettingsHttp Access Https Access Secure Socket Layer 17 Management Services Configuration Screen SSH Session Setup Configuring SSHSSH Clients Click Commands Update AP via Http or via Tftp Uploading Externally Generated Host Keys Serial Configuration Settings Radius Based Management Access Automatic Configuration AutoConfig Auto Configuration and the CLI Batch FileSet up Automatic Configuration for Static IP 19 Automatic Configuration Screen Set up Automatic Configuration for Dynamic IP Hardware Configuration Reset Chrd 20 Dhcp Options Setting the Boot Server Host Name Configuration Reset via Serial Port During Bootup Configuring Hardware Configuration ResetClick Configure Management Chrd Procedure to Reset Configuration via the Serial Interface Filtering Ethernet ProtocolStatic MAC Select the Filter Operation Type Advanced Configuration AP-700 User Guide Filtering Wired MAC Address 0040F41CDB6A Wireless MAC Address 00022D5194E4Wired MAC Address Wireless MAC Address 0020A6124E38 Advanced TCP/UDP PortNumber Click Add under the TCP/UDP Port Filter Table heading Editing TCP/UDP Port Filters Click Edit under the TCP/UDP Port Filter Table heading Alarms Groups Security Trap Group Trap Name Description Severity Level Operational Trap Group Trap Name Description Severity Level Trap Name Description Severity Level Flash Memory Trap Group Trap Name Description Severity Level Alarm Host Table Tftp Trap Group Trap Name Description Severity LevelImage Trap Group Trap Name Description Severity Level Sntp Trap Group Trap Name Description Severity Level Advanced Configuration AP-700 User Guide Alarms Configuring Syslog Event Notifications SyslogEvent Priority Description Syslog Messages Syslog Message Name Priority Severity Description Advanced Configuration AP-700 User Guide Rogue Scan 25 Preventing Rogue AP Attacks Continuous Scanning Mode Background Scanning ModeMulti-Band Scanning Rogue Scan Data Collection Click Configure Alarms Rogue Scan Rogue Scan 26 Rogue Scan Screen Bridge Spanning Tree Advanced Configuration AP-700 User Guide Bridge Storm Threshold Configuring Interfaces for Packet Forwarding Intra BSSPacket Forwarding Wireless Multimedia Extensions WME/Quality of Service QoS Click Configure QoS PolicyQoS Enabling QoS and Adding QoS policies Advanced Configuration AP-700 User Guide QoS Enter the Priority Mapping Index Click Configure QoS Priority Mapping Priority Mapping Enhanced Distributed Channel Access Edca STA Edca Table and AP Edca Table 32 Edca Tables Advanced Configuration AP-700 User Guide QoS Radius Servers per Authentication Mode and per Vlan Radius Profiles Configuring Radius Profiles Radius Servers Enforcing Vlan Access Control Advanced Configuration AP-700 User Guide 35 Add Radius Server Profile MAC Access Control Via Radius Authentication 802.1x Authentication using RadiusRadius Accounting Authentication Attributes Accounting Attributes101 102 SSID/VLAN/Security Vlan Overview103 104 Typical User Vlan Configurations Control Access to the APClick Configure SSID/VLAN/Security Mgmt Vlan Management Vlan Provide Access to a Wireless Host in the Same Workgroup Disable Vlan TaggingSecurity Profile Advanced Configuration AP-700 User Guide SSID/VLAN/Security Authentication ProcessWi-Fi Protected Access WPA/802.11i WPA2 107 Authentication Protocol Hierarchy 108 Configuring Security Profiles Click Configure SSID/VLAN/Security Security ProfileVLANs and Security Profiles 109 Non Secure Station WEP Station802.1x Station WPA Station 111 40 Security Profile Table Add Entries 112 MAC Access Wireless113 Configuring an SSID/VLAN with Vlan Tagging Disabled 114 43 SSID/VLAN Edit Entries Screen Vlan Tagging Disabled 115 Configuring SSID/VLANs with Vlan Tagging Enabled Click SSID/VLAN/Security Wireless116 45 SSID/VLAN Edit Entries Screen Vlan Tagging Enabled 117 Broadcast Ssid and Closed System 118 Monitoring 119 Version Monitoring AP-700 User Guide IP/ARP Table Icmp Monitoring Tab Learn Table Learn Table Monitoring Tab Radius 124 Monitoring AP-700 User Guide Interfaces 125 126 Station Statistics 127 Monitoring AP-700 User Guide Station Statistics 128 Commands Introduction to File Transfer via Tftp or Http129 Image Error Checking During File Transfer Tftp File Transfer GuidelinesHttp File Transfer Guidelines 130 Update AP Update AP via TftpCommands AP-700 User Guide 131 Update AP via Http Commands AP-700 User Guide Update AP via Http132 Commands AP-700 User Guide Retrieve File Retrieve FileRetrieve File via Tftp 133 Retrieve File via Http 134 Retrieve File via Http Command Screen Reboot ResetCommands AP-700 User Guide Reboot 13 Help Link Configuration Screen 137 Help Link Troubleshooting Troubleshooting ConceptsSymptoms and Solutions Connectivity Issues Basic Software Setup and Configuration Problems Client Connection Problems Vlan Operation Issues Active Ethernet AE Recovery Procedures Reset to Factory Default ProcedureForced Reload Procedure Download a New Image Using ScanTool Download ProcedurePreparing to Download the AP Image 143 Download a New Image Using the Bootloader CLI 144 Setting IP Address using Serial Port Initializing the IP Address using CLIHardware and Software Requirements Attaching the Serial Port Cable Radius Authentication Server Related ApplicationsTftp Server 146 Troubleshooting AP-700 User Guide Related Applications 147 Command Line Interface CLI General NotesPrerequisite Skills and Knowledge Notation Conventions CLI Error Messages Navigation and Special Keys Command Line Interface CLI Variations Bootloader CLICommand Line Interface CLI AP-700 User Guide 150 CLI Command Types Operational CLI CommandsExample 1. Display Command list Example 2. Display specific Commands Example 3. Display parameters for set and showExample 3a. Display every parameter that can be changed Example 3b. Display parameters based on letter sequence Example 4. Display Prompts for Successive ParametersDone, exit, quit Download Help HistoryPasswd 154 Parameter Control Commands Show CLI CommandSearch 155 Set CLI Command Configuring Objects that Require RebootSet and show Command Examples Examples Example 1 Set the Access Point IP Address Parameter Example 4 Enable, Disable, or Delete a table entry or rowExample 2 Create a table entry or row Example 3 Modify a table entry or row Example 5 Show the Group Parameters Example 6 Show Individual and Table Parameters158 Using Tables and Strings Using StringsWorking with Tables 159 Configuring the AP using CLI commands Set Basic Configuration Parameters using CLI CommandsLog into the AP using HyperTerminal Log into the AP using Telnet Change Passwords Set Network Names for the Wireless InterfaceSet System Name, Location and Contact Information 161 Country Code 162 Configure SSIDs Network Names, VLANs, and Profiles 163 Other Network Settings Download an AP Configuration File from your Tftp ServerBackup your AP Configuration File Set up Auto Configuration Configure the AP as a Dhcp Server Configure the DNS Client Operational Mode Enable/Disable Closed SystemAutochannel Select ACS Shutdown/Resume Wireless Service Enable/Disable Super Mode 802.11a/g onlyEnable/Disable Turbo Mode 802.11a/g only Configure Antenna Diversity Edit Management IP Access Table Configure Management PortsSet Communication Ports Configure Secure Socket Layer Https Set Telnet Session TimeoutsConfigure Serial Port Interface 169 Create/Enable WDS Enable/Disable WDSSetup MAC Address Access Control Add an Entry to the MAC Access Control Table Figure A-17 Result of showradiustbl CLI Command 171 Enable Vlan Management Disable Vlan ManagementAdd a Entry to the Wifssid Table CLI Monitoring Parameters Parameter Tables 174 Filtering Parameters 175 Name Type Value Access CLI Parameter Set sysresettodefaultsSystem Parameters 176 DNS Client for Radius Name Resolution Dhcp Server Parameters Name Type Value Access CLI ParameterNetwork Parameters 177 Dhcp Server table for IP pools Dhcp Relay GroupDhcp Relay Server Table 178 Sntp Parameters Name Type Value Access CLI Parameter Link Integrity IP Target Table179 Wireless Interface Parameters Interface ParametersCommon Parameters to 802.11a/b/g 180 802.11a Only Parameters 181 802.11b Only Parameters 802.11b/g Only Parameters182 For 802.11g-only mode For 802.11b/g modeFor 802.11b-only Mode Wireless Distribution System WDS Parameters Wireless Interface SSID/VLAN/Profile ParametersChannel Blacklist Parameters 184 Wireless Distribution System WDS Security Table Parameters Snmp Parameters Name Type Value Access CLI ParameterManagement Parameters 185 186 Http Parameters Name Type Value Access CLI Parameter Telnet Parameters Name Type Value Access CLI Parameter187 Serial Port Parameters Name Type Value Access CLI Parameter Radius Based Management Access ParametersSSH Parameters 188 IP Access Table Parameters Tftp Server Parameters189 Filtering Parameters Ethernet Filtering Table190 Proxy ARP Parameters Name Type Value Access CLI Parameter TCP/UDP Port FilteringTCP/UDP Port Filtering Table 191 Alarms Parameters Name Type Value Access CLI Parameter Syslog Group 192Snmp Table Host Table Parameters Syslog Parameters Syslog Host Table 193 Bridge Parameters Spanning Tree Priority and Path Cost Table194 Storm Threshold Table Intra BSS Subscriber BlockingPacket Forwarding Parameters 195 Radius Server Configuration Parameters Radius ParametersGeneral Radius Parameters 196 MAC Access Control Table Security Parameters VLAN/SSID Parameters Security Profile Table198 Iapp Parameters Name Type Value Access CLI Parameter Enabling QoS Name Type Value Access CLI ParameterConfiguring QoS Policies Other Parameters Specifying the Mapping between 802.1p and 802.1D Priorities 200 Defining the QoS Policy used for a Wireless Interface Ssid CLI Batch File201 Auto Configuration and the CLI Batch File Reboot BehaviorCLI Batch File Format and Syntax CLI Batch File Error Log 203 Ascii Character Chart HexCharact Equival Ent 204 Specifications Software FeaturesNumber of Stations per BSS Management Functions Medium Access Control MAC Functions Specifications AP-700 User Guide Software FeaturesAdvanced Bridging Functions Security Functions Specifications AP-700 User Guide Network Functions207 Hardware Specifications Mode Frequency Channel Product SKU Band Available Channels802.11b/g 802.11a Upper 149 153 157 161 ISM Band 165 RF Performance 802.11a RF Performance 802.11a Data Rates Mbps210 Technical Support Online SupportSoftware and Documentation Downloads Knowledgebase 211 Telephone Support Technical Support AP-700 User Guide Telephone SupportInternational 212 Statement of Warranty Warranty CoverageRepair or Replacement Limitations of Warranty Ask a Question or Open an Issue Other InformationSearch Knowledgebase Other Adapter Cards Regulatory Compliance Product Model Numbers215 Safety Information USA, Canada, & European Union Regulatory Compliance AP-700 User Guide216 Federal Communications Commission FCC 217 Modifications 218 Industry Canada IC 219 European Union 220 Regulatory Compliance Certifications Summary Country Certification/Reference No221