Command Line Interface (CLI) |
|
|
|
| ||
Parameter Tables |
|
|
|
|
| |
|
|
|
|
|
|
|
Other Parameters |
|
|
|
|
| |
IAPP Parameters |
|
|
|
|
| |
|
|
|
|
|
|
|
| Name | Type | Value | Access | CLI Parameter |
|
| IAPP | Group | N/A | R | iapp |
|
| IAPP Status | Integer | enable (default) | RW | iappstatus |
|
|
|
| disable |
|
|
|
| Periodic Announce | Integer | 80 | RW | iappannint |
|
| Interval (seconds) |
| 120 (default) |
|
|
|
|
|
| 160 |
|
|
|
|
|
| 200 |
|
|
|
| Announce Response | Integer | 2 seconds | R | iappannresp |
|
| Time |
|
|
|
|
|
| Handover | Integer | 410 ms | RW | iapphandtout |
|
|
|
| 512 ms (default) |
|
|
|
|
|
| 614 ms |
|
|
|
|
|
| 717 ms |
|
|
|
|
|
| 819 ms |
|
|
|
| Max. Handover | Integer | 1 - 4 (default 4) | RW | iapphandretx |
|
| Retransmissions |
|
|
|
|
|
| Send Announce Request | Integer | enable (default) | RW | iappannreqstart |
|
| on Startup |
| disable |
|
|
|
NOTE: These parameters configure the Inter Access Point Protocol (IAPP) for roaming. Leave these settings at their default value unless a technical representative asks you to change them.
Wireless Multimedia Enhancements (WME)/Quality of Service (QoS) parameters
The Wireless Multimedia Enhancements commands enable and configure Wireless Multimedia Enhancement/Quality of Service parameters. The following two commands are part of the Wireless Interface Properties table.
Enabling QoS
Name | Type | Value | Access | CLI Parameter |
QoS Status | Object Status | enable | RW | qosstatus |
|
| disable (default) |
|
|
QoS Maximum Medium | Integer | 50 - 90 | RW | qosmaximummediumthresh |
Threshold |
|
|
| old |
Configuring QoS Policies
The QoS group manages the QoS policies:
Name | Type | Value | Access | CLI Parameter |
QoS Group | Group | N/A | N/A | qos |
QoS Policy Table | Table | N/A | N/A | qospolicytbl |
Table Primary Index | Integer | N/A | R | index |
Table Secondary Index | Integer | N/A | R | secindex |
Policy Name | Display String | 0 - 32 characters | RW | policyname |
