Advanced Configuration AP-700 User Guide
QoS
90
QoS

Wireless Multimedia Extensions (WME)/Quality of Service (QoS)

The AP supports Wireless Multimedia Enhancements which defines an intermediate solution for QoS functionality until
the IEEE 802.11e specification is formally approved. WME is based on a subset of the 802.11e standard, and defines
enhancements to the MAC for wireless LAN applications with Quality of Service requirements, which include transport of
voice traffic over IEEE 802.11 wireless LANs.
The enhancement are in the form of changes in protocol frame formats (addition of new fields and information elements),
addition of new messages, definition of new protocol actions, channel access mechanisms (differentiated control of
access to medium) and network elements (QoS/WME aware APs, STAs), and configuration management.
WME supports Enhanced Distributed Channel Access (EDCA) for prioritized QoS services. The WME/QoS feature can
be enabled or disabled. For more information on QoS, see “Technical Bulletin 69504 Revision 2” at
<http://keygen.proxim.com/support/orinoco/tb/tb69504_3wmm.pdf>.
Enabling QoS and Adding QoS policies
Perform the following procedure to enable QoS and add QoS policies:
1. Click Configure > QoS > Policy.
Figure 4-28 QoS Policies
2. To enable QoS, check the Enable Quality of Service checkbox.
3. Configure the QoS Maximum Medium Threshold for all Admission Controls. Admission will be granted if the new
requested traffic stream and already admitted time is less than the medium maximum threshold.