Advanced Configuration AP-700 User Guide
QoS
91
4. To add a QoS Policy, click the Add button in the “QoS Policies Table” box. The Add Entries box appears.
Figure 4-29 Add QoS Policy
5. Enter the Policy Name.
6. Select the Policy Type:
•inlayer2: inbound traffic direction, Layer 2 traffic type
•inlayer3: inbound traffic direction, Layer 3 traffic type
•outlayer2: outbound traffic direction, Layer 2 traffic type
•outlayer3: inbound traffic direction, Layer 3 traffic type
•spectralink: SpectraLink traffic
7. Enter the Priority Mapping Index.
For layer 2 policies, an index from the 802.1p to 802.1d mapping table should be specified. For layer 3 policies, an
index from the 802.1p to IP DSCP mapping table should be specified. No mapping index is required for SpectraLink.
8. Select whether to Enable QoS Marking.
9. Click OK.