Lexmark X748x, 34TT027, 34TT001, X746de, X746x Understanding the printer menus 164, Configure Log

	Understanding the printer menus	164
Use		To
Configure Log		Specify whether and how the audit logs are created.
Enable Audit		Notes:
	Yes
		• “Enable Audit” determines if events are recorded in the secure audit log and remote syslog. No is the
	No
		factory default setting.
Enable Remote Syslog
		• “Enable Remote Syslog” determines if logs are sent to a remote server. No is the factory default
	Yes
		setting.
	No
		• “Remote Syslog Server” determines the value used to send logs to the remote syslog server. 4 is the
Remote Syslog Server
		factory default setting.
	[256 character string]
		• “Remote Syslog Port” identifies the port over which the printer transmits logged events to a remote
Remote Syslog Port
		server.
	1–65535
		• “Remote Syslog Method” identifies the protocol used by the printer to transmit logged events to a
Remote Syslog Method
		remote server. Normal UDP is the factory default setting.
	Normal UDP
		• “Remote Syslog Facility” determines the Facility value that the printer uses when sending events to
	Stunnel
		the remote syslog server. 4 is the factory default setting.
Remote Syslog Facility
		• “Log full behavior” determines how the printer resolves if the log entirely fills its allotted memory.
	0–23
		“Wrap over oldest entries” is the factory default setting.
Log full behavior
		• The value of the “Admin’s e‑mail address setting can be a single e‑mail address or a comma‑delimited
	Wrap over oldest entries
		list of e‑mail addresses.
	E‑mail log then delete all entries
		• “Digitally sign exports” determines if the printer automatically signs each exported security log. Off is
Admin’s e-mail address
		the factory default setting.
	[256 character string]
		• “Severity of events to log” records the severity value of each event. 4 is the factory default setting.
Digitally sign exports
		• “Remote Syslog non-logged events” determines if the printer sends events to the remote server that
	Off
		have a severity level greater than the value of the “Severity of events to log” setting. No is the factory
	On
		default setting.
Severity of events to log
		• “E-mail log cleared alert” determines if the printer sends an e‑mail to the administrator every time a
	0–7
		log is deleted via printer control panel or EWS. No is the factory default setting.
Remote Syslog non-logged events
		• “E-mail log wrapped alert” determines if the printer sends the administrator an e‑mail when log
	No
		entries are wrapping. No is the factory default setting.
	Yes
		• “% full alert level” determines if the space occupied by log equals or exceeds the value of the full alert
E-mail log cleared alert
		level. 90 is the factory default setting.
	No	• “E-mail % full alert” determines if the printer sends the administrator an e‑mail when the log fills a
	Yes
		certain amount of its allotted space. No is the factory default setting.
E-mail log wrapped alert		• “E-mail log exported alert” determines if the printer sends the administrator an e‑mail when there is a
	No	log exported. No is the factory default setting.
	Yes	• “E-mail log settings changed alert” determines if the printer sends the administrator an e‑mail when
E-mail % full alert		the value of the Enable Audit Log setting is toggled.
	No
	Yes
% full alert level
	1–99
E-mail log exported alert
	No
	Yes
E-mail log settings changed alert
	No
	Yes
Log line endings
	LF (\n)
	CR (\r)
	CRLF (\r\n)