Additional printer setup

37

Installing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

1Access the system board.

For more information, see “Accessing the system board” on page 26. Note: This task requires a flathead screwdriver.

2Unpack the printer hard disk.

3Locate the appropriate holes on the system board where the posts of the plastic tee will be aligned.

Note: If an optional ISP is currently installed, then the printer hard disk must be installed onto the ISP.

Page 37
Image 37
Lexmark 34TT001, 34TT027, X748x, X746de, X746x, X748DE manual Installing a printer hard disk, Additional printer setup