Lexmark 34TT001, 34TT027, X748x, X746de, X746x, X748DE manual

Do not use paper that has been cut or trimmed by hand. Do not mix paper sizes, weights, or types in the same stack.

•

•

Use only recommended paper or specialty media.

Do not load wrinkled, creased, damp, bent, or curled paper. Flex and straighten paper before loading it.

•

•

•

Use recommended paper

Push the tray in firmly after loading paper.

•

Do not load too much paper. Make sure the stack height does not exceed the maximum paper fill indicator.

Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.

Do not remove a tray while the printer is printing.

•

•

•

• Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing too tightly against the paper or envelopes.

Make sure paper lies flat in the tray.

Correct paper loading Incorrect paper loading

•

Clearing jams

Carefully select paper and specialty media and load it properly to avoid most jams. For more information, see “Avoiding jams” on page 253. If jams do occur, follow the steps outlined in this chapter.

Note: Jam recovery is set to Auto by default. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.

Avoiding jams

Load paper properly

Clearing jams

253