Lexmark X746de Parallel x menu, Understanding the printer menus 153, ENA Address, ENA Netmask

Understanding the printer menus		153
	Use	To
	Job Buffering	Temporarily store print jobs in the printer hard disk before printing.
	Off	Notes:
	On
		• Off is the factory default setting.
	Auto
		• On buffers jobs on the printer hard disk.
		• Auto buffers print jobs only if the printer is busy processing data from another
		input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Mac Binary PS	Set the printer to process Macintosh binary PostScript print jobs.
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• On processes raw binary PostScript print jobs.
		• Off filters print jobs using the standard protocol.
	ENA Address	Set the network address information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Set the netmask information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Set the gateway information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.

Parallel [x] menu

Note: This menu appears only when an optional parallel card is installed.

Use	To
PCL SmartSwitch	Set the printer to automatically switch to PCL emulation when a print job received
On	through a serial port requires it, regardless of the default printer language.
Off	Notes:
	• On is the factory default setting.
	• When set to Off, the printer does not examine incoming data. The printer uses
	PostScript emulation if PS SmartSwitch is set to On. It uses the default printer
	language specified in the Setup menu if PS SmartSwitch is set to Off.