Lexmark X748x Setting the date and time, Configuring the printer to observe daylight saving time

Faxing 116

If you do not know the IP address of the printer, you can:

•View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.

•Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2Click Settings > Fax Settings > Analog Fax Setup.

3In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.

4In the Fax Number or Station Number field, enter the printer fax number.

5Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send. If there is a power failure, then you may have to reset the date and time.

1Type the printer IP address in the address field of your Web browser. If you do not know the IP address of the printer, then you can:

•View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.

•Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2Click Security > Set Date and Time.

3In the Set Date & Time field, enter the current date and time.

4Click Submit.

Note: It is recommended to use the network time.

Configuring the printer to observe daylight saving time

The printer can be set to automatically adjust for daylight saving time.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Security > Set Date and Time.

3Click the Automatically Observe DST check box.

4In the Custom Time Zone Setup section, set the DST start and end dates.

5Click Submit.