Xerox 4090 NPS manual Error getting unique data filename, Error opening configuration file path

DOS WORKSTATION MESSAGES

	Error getting unique data filename
	The print command was entered, but an internal error occurred while
	the system was creating a unique filename.
Action	Write down the message and contact your system administrator.

	Error opening configuration file: <path>
	The listjob, listq, or print command was entered, but the software is
	unable to communicate with the Printer Controller.
Action	Write down the message and contact your system administrator to
	verify that the client software was properly installed.

	Invalid indirection file
	In entering the print command, an indirection file pathname with the
	-@ option was specified. That pathname was inaccessible or
	contained invalid characters.
Action	Refer to the Guide to Submitting Jobs from the Client for the proper
	syntax and characters for this option.

	Invalid option: <>
	In entering the print command, an invalid value for one of the optional
	terms was specified.
Action	Refer to the Guide to Submitting Jobs from the Client for acceptable
	options.

	JobTicket conflict: <-c1> and <-c2> are
	mutually exclusive!
	The print command was entered with two options (<-c1> and <-c2>)
	specified that cannot be used on the same print request.
Action	Choose which option you want to use and reenter the command.

	JobTicket__DecodeAXJT()
	The print command was entered, but an internal error occurred.
Action	Write down the message and contact your service representative.
	JobTicket error for option:
	The print command was entered, but an internal error occurred,
	probably due to a lack of memory.
Action	Write down the message. Contact your system administrator and
	verify that your system meets the minimum configuration
	requirements.

51-4 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE