Xerox 4050 NPS, 4090 NPS, 4890 NPS, 4850 NPS manual Clear areas 1A and 2A

				PRINTER CONTROLLER MESSAGES
Message			Explanation/action
		1.		Clear areas 1A and 2A.
		2.		Press the Continue button.
E091	Vertical transport lead		The paper fed from either tray 1 or the duplex tray did not
	edge jam.		arrive at the vertical transport switch within the allotted
			time.
		1.		Clear area 1.
		2.		Press the Continue button.
E092	Vertical transport trailing		The paper fed from any of the trays did not leave the
	edge jam.		vertical transport jam switch in the allotted time.
		1.		Clear areas 1 and 2.
		2.		Press the Continue button.
E093	Right front door is open.		The door was open during printing.
		1.		Close the right front door while the printer is in
				standby mode.
		2.		Press the Continue button.
E094	Clear paper path behind		A job has not printed and completed a purge sequence.
	right front door.		Clear the entire paper path.
E095	A jammed sheet was		A tray 1 or tray 2 feeder jam occurred, but the paper was
	successfully purged.		cleared from the feed head during cycledown. The feeder
			takeaway roll clutch is turned on for a short period before
			the main drives go off.
		1.		Clear areas 1 and 2.
		2.		Press the Continue button.
E096	Late arrival at pre-		The paper failed to arrive at the pre-transfer switch in time.
	transfer switch.	1.		Clear area 2.
		2.		Press the Continue button.
E097	Late arrival at pre-fuser		The paper failed to arrive at the pre-fuser switch in time.
	switch.	1.		Clear areas 2 and 3.
		2.		Press the Continue button.
E098	Late departure from pre-		The paper failed to depart from the pre-fuser switch in
	fuser switch.		time.
		1.		Clear area 3.
		2.		Press the Continue button.
E099	Late arrival at post fuser		The paper failed to arrive to the post fuser switch in time.
	switch.	1.		Clear area 4. (Clear the de-curler, then pull the fuser
				and examine it for wraps or accordion jams.)
		2.		Press the Continue button.

XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE 48-15