Xerox 4090 NPS, 4890 NPS, 4850 NPS manual If Uncollated and ordered Custom paper type are selected

WINDOWS WORKSTATION MESSAGES

	Found printer configuration information in old INI file. Would
	you like to move the configured printers to the new INI file?
	XDS has discovered configured printers from an older Xerox
	document submission application and would like to make these
	configured printers available to you.
Source	DocuPrint Print Submission software
Action	Select ’Yes’ if you wish to copy the configured printers from the old
	INI file to the new INI file. Select ’No’ if you do not want this
	information to be copied.

	If Uncollated and ordered Custom paper type are selected, the
	Order Count must be 1.
	You selected [Precut Tab] or [Custom] ordered as the paper type and
	you have entered an order count other than 1.
Source	DocuPrint Print Submission software
Action	Change the order count to 1 or select another paper stock type.

	If Uncollated and Precut Tabs are selected, Tab Positions must
	be 1.
	Uncollated precut tabs can have only a tab position of 1.
Source	DocuPrint Print Submission software
Action	Perform one of the following actions to change the printing options
	that were selected from the Job Ticket:

•

•

•

Select [Collated] and try to print your job again.

Select a paper type option other than [Precut Tab] and try to print your job again.

Enter a value of 1 for the tab positions and try to print your job again.

	Jobs cannot use more than two ordered stocks.
	More than two paper stocks for the job were specified.
Source	DocuPrint print driver
Action	Examine your document and change the stock options.

49-14 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE