Xerox 4850 NPS, 4090 NPS, 4890 NPS, 4050 NPS manual Necessary

WINDOWS WORKSTATION MESSAGES

	Some of the settings for paper stocks 2-10 are not permitted for
	signature jobs. The default setting will be substituted where
	necessary.
	You changed the job type from Standard to Signature. One or more
	of the stocks you had defined for this job are using options that are
	only available for a Standard job type.
Source	DocuPrint Print Submission software
Action	Perform one of the following steps:
	Select [Yes] to have the job type changed to Signature. The options
	that are not available for a Signature job will be reset to the default
	values for a Signature job.
	Select [No] to keep the job type as Standard.

	Stapled collated sets must contain between 2 and 50 sheets.
	The number of pages in the job falls outside the range for stapled
	collated sets.
Source	DocuPrint print driver
Action	If your document has more than 50 pages, delete the staple
	command or divide the job into smaller sets.

	Stapled collated sets must contain between 2 and 70 sheets.
	You selected [Collated] as the collation option, [Portrait Staple],
	[Landscape Staple], or [Dual Staple] as the Finishing option in the
	Setup dialog and you have programmed fewer than 2 or more than
	70 pages of Blank Page Inserts.
Source	DocuPrint Print Submission software
Action	Perform one of the following steps:
	Select a Finishing option other than [Portrait Staple], [Landscape
	Staple], or [Dual Staple] if you wish to use fewer than 2 or more than
	70 pages of Blank Page Inserts.
	Reduce the total number of Blank Page Inserts to some number
	greater than 2 or less than 70, if you wish to retain the Finishing
	option that you have selected.

	The Account field cannot begin with a <Space>.
	A space was entered as the first character in the Account text box.
Source	DocuPrint Print Submission software
	DocuPrint print driver
Action	Delete the space at the beginning of the account entry.

49-20 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE