Xerox 4050 NPS, 4090 NPS, 4890 NPS Print request not forwarded, Server or directory unreachable

	UNIX WORKSTATION MESSAGES
	Print request not forwarded,
	server or directory unreachable
	The listjob, listq, or print command was entered, but the software
	couldn’t communicate with the Printer Controller.
Action	Write down the message. Ask your system administrator to check
	communication between your workstation and the Printer Controller
	and to verify that the file sent is not too large.
	Server not responding
	The listjob or listq command was entered, but the Printer Controller
	failed to respond to the command within the allotted time.
Action	Reissue the command. If you see the same message, contact your
	system administrator for assistance.
	Server or directory unreachable
	The listjob, listq, or print command was entered, but the software
	couldn’t communicate with the Printer Controller.
Action	Write down the message. Ask your system administrator to check
	communication between your workstation and the Printer Controller
	and to verify that the file sent is not too large.
	SetOfDisp__Create()
	The print command was entered, but an internal error occurred.
Action	Write down the message and contact your service representative.
	SetOfDisp__Insert()
	The print command was entered, but an internal error occurred.
Action	Write down the message and contact your service representative.
	System error
	The listjob or listq command was entered, but an internal error
	occurred due to one of the following conditions:

Action •

•

•

Lack of memory

Inability to open a local temporary file

Network error.

Too many arguments

In entering the print command, more than 128 options were entered in the command line.

Action	Reenter the command with 128 or fewer options. Refer to the Guide
	to Submitting Jobs from the Client for the correct syntax for the
	options.

MESSAGES GUIDE 52-7