Xerox 4850 NPS manual Lprtab2ps copy file is too large, Memory allocation error, Non-unique option

DOS WORKSTATION MESSAGES

	lpr:tab__2__ps: copy file is too large
	The lpr command was entered, but the job is too large for it. This is a
	limitation of the lpr command, not the DocuPrint print job utility.
Action	Allocate more space on the disk drive where the directory tmp
	resides.

	Memory allocation error:
	The print command was entered, but an internal error occurred due
	to a lack of memory.
Action	Write down the message. Contact your system administrator and
	verify that your system meets the minimum memory requirements.

	Missing value for option
	The print command was entered, but a necessary value for a
	specified print option was left out.
Action	Refer to the Guide to Submitting Jobs from the Client for acceptable
	values for the options.

	Non-unique option:
	The print command was entered, but the print option specified was
	not valid.
Action	Refer to the Guide to Submitting Jobs from the Client for acceptable
	values for the options.

	Print queue name must be specified
	The -printerName queue option in the print command line was not
	included. This option is required for submitting a job.
Action	Reenter the command, making sure to include the -printerName
	queue option.

	Print request not forwarded, server or directory unreachable
	The listjob, listq, or print command was entered, but the software
	couldn’t communicate with the Printer Controller.
Action	Write down the message. Ask your system administrator to check
	communication between your workstation and the Printer Controller
	and to ensure that the Xerox client was enabled at installation.

	Server not responding
	You entered the listjob or listq command, but the Printer Controller
	failed to respond to the command within the allotted time.
Action	Reenter the command. If you see the same message, contact your
	system administrator for assistance.

51-6 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE