Xerox 4050 NPS, 4090 NPS, 4890 NPS, 4850 NPS manual Inches 363 mm cannot be bound or stapled

	WINDOWS WORKSTATION MESSAGES
	Paper stocks wider than 9.0 inches (229 mm) or longer than 14.3
	inches (363 mm) cannot be bound or stapled.
	You selected [Bound] or a stapling option for the Finishing options
	but these options are not available for the paper size you are using.
Source	DocuPrint Print Submission software
Action	Select another paper stock that is less than 9.0 inches (229
	millimeters) wide or less than 14.3 inches (363 millimeters) long. If
	you specify a Custom width for paper size, make sure that you enter
	a width less than 9.0 inches or a length less than 14.3 inches. Any
	paper size is valid except A3 (420 x 297 millimeters) and tabloid (17.0
	x 11.0 inches). Try to print your job again.
	Paper stocks with a Custom paper type cannot be drilled.
	Both the [Drilled] option and the [Custom] paper type option were
	specified.
Source	DocuPrint Print Submission software
	DocuPrint print driver
Action	Select [Standard] for the paper type or deselect the [Drilled] option
	and resubmit your job.
	Paper stocks with widths greater than 9.0 inches (229 mm)
	cannot have lengths greater than 11.7 inches (297 mm).
	You are using stocks that are both wider than 9.0 inches and longer
	than 11.7 inches.
Source	DocuPrint Print Submission software
Action	Select paper stocks that are either less than 9.0 inches wide or less
	than 11.7 inches long.
	Paper Weight must have a value between 60 and 413 g/m2.
	You specified an invalid paper weight.
Source	DocuPrint Print Submission software
Action	Specify a paper weight between 60 and 413 g/m2.
	Print server file and reprint cannot be done simultaneously.
	Please uncheck one or the other to proceed.
	You have checked both the ’Print server file’ and ’Reprint’
	checkboxes.
Source	DocuPrint Print Submission software
Action	Uncheck one or both of the boxes.

MESSAGES GUIDE 49-19