Xerox 4050 NPS Server or directory unreachable, SetOfDispCreate, SetOfDispInsert, System error

	DOS WORKSTATION MESSAGES
	Server or directory unreachable
	You entered the listjob, listq, or print command, but the software
	couldn’t communicate with the Printer Controller.
Action	Write down the message. Ask your system administrator to check
	communication between your workstation and the Printer Controller
	and to verify that the installation procedure was successfully
	completed.
	SetOfDisp__Create()
	The print command was entered, but an internal error occurred.
Action	Write down the message and contact your service representative.
	SetOfDisp__Insert()
	The print command was entered, but an internal error occurred.
Action	Write down the message and contact your service representative.
	System error
	The listjob or listq command was entered, but an internal error
	occurred due to one of the following conditions:

•

•

•

Lack of memory

Inability to open a local temporary file

Network error.

Action	Write down the message and contact your service representative.
	Too many arguments
	In entering the print command, more than 128 arguments were
	entered in the command line.
Action	Reenter the command with 128 or fewer arguments. Refer to the
	Guide to Submitting Jobs from the Client for the correct syntax for
	the print options.
	Unable to find listfile
	In entering the print command, a required value for the -listfileoption
	was not specified.
Action	Reenter the print command, making sure you specify a value for this
	option. Refer to the Guide to Submitting Jobs from the Client for
	acceptable values.

MESSAGES GUIDE 51-7