Manuals / Xerox / Computer Equipment / Printer

Xerox 4050 NPS, 4090 NPS, 4890 NPS, 4850 NPS manual Paper stock width must be from 203 mm to 216 mm

Models: 4050 NPS 4850 NPS 4090 NPS 4890 NPS

1 248

Download 248 pages 10.85 Kb

Page 175

	WINDOWS WORKSTATION MESSAGES

	Paper stock width must be from 203 mm to 216 mm, and the
	length must be from 254 mm to 356 mm.
	An invalid paper stock width or length was specified in the Custom
	Size dialog box.
Source	DocuPrint Print Submission software
	DocuPrint print driver
Action	Specify a width of 203 to 216 millimeters and a length of 254 to 356
	millimeters.

	Paper stock width must be from 203 mm to 432 mm, and the
	length must be from 254 mm to 363 mm.
	You specified an invalid paper stock size in the Custom Size dialog.
Source	DocuPrint Print Submission software
Action	Specify a valid paper stock size in the Custom Size dialog.

	Paper stock width must be from 7.00 to 18.27 inches to 17.0
	inches, and the length must be from 10.00 inches to 14.02
	inches.
	You specified an invalid paper stock size in the Custom Size dialog.
Source	DocuPrint Print Submission software
Action	Specify a valid paper stock size in the Custom Size dialog.

	Paper stock width must be from 8.0 inches to 17.0 inches, and
	the length must be from 10.0 inches to 14.3 inches.
	You specified an invalid paper stock size in the Custom Size dialog.
Source	DocuPrint Print Submission software
Action	Specify a valid paper stock size in the Custom Size dialog.

	Paper stock width must be from 8.0 inches to 8.5 inches, and the
	length must be from 10.0 inches to 14.0 inches.
	An invalid paper stock width or length was specified in the Custom
	Size dialog box.
Source	DocuPrint Print Submission software
	DocuPrint print driver
Action	Specify a width of 8.0 to 8.5 inches and a length of 10.0 to 14.0
	inches.

MESSAGES GUIDE

49-17

Image 175

Xerox 4050 NPS, 4090 NPS, 4890 NPS, 4850 NPS manual Paper stock width must be from 203 mm to 216 mm

Contents

Version 7.1 August 2000 721P86941 Page Version 7.1 August 2000 721P86941 Page Laser safety Xerox Docuprint 4050/4090/4850/4890/92C NPS Messages Guide Laser safety Xerox Docuprint 4050/4090/4850/4890/92C NPS Messages Guide Table of Contents Page Table of Contents Page Introduction Conventions Xerox DocuPrint Network Printer Series Page Introduction Conventions Xerox DocuPrint Network Printer Series Page Printer Controller messages Explanation/action Message48-3 48-4 48-5 48-6 48-7 48-8 Message Explanation/action PS-adminShow Status Messages using Show StatusQueuing is Started Scheduling Policy resourceMatch PS-admin C076 Sfrs 48-14 Clear areas 1A and 2A 48-16 48-17 Clear area 2a 48-19 48-20 48-21 48-22 48-23 Bin #1 sensor 48-25 48-26 48-27 48-28 48-29 48-30 48-31 48-32 48-33 Loss of some supply voltage to XER 48-35 48-36 48-37 Type PSP 48-40 48-41 General system messages Memory System Communication FAULT, see Message AT CRT Printer Controller messages 48-2 48-3 48-4 48-5 48-6 48-7 48-8 Message Explanation/action Messages using Show Status Message C076 Message Explanation/action 48-14 Clear areas 1A and 2A 48-16 48-17 Message Explanation/action 48-19 Message 48-21 48-22 48-23 Bin #1 sensor 48-25 Message Explanation/action 48-27 48-28 48-29 Message 48-31 48-32 48-33 Loss of some supply voltage to XER Message 48-36 48-37 Type PSP 48-40 Message Explanation/action General system messages Memory System Communication FAULT, see Message AT CRT Job Ticket must have an extension of .XJT Fatal memory error has occurred. Close some applicationsRestart the Xpps application Job Name is RequiredRead. There may be a memory problem. The operation is Problem occurred while the command-line arguments wereCancelled Problem occurred while the dropped file names were beingClose some applications or add more memory An entry using this page already existsAn error occurred while attempting to free allocate global Network printerAn error occurred while the file containing the printer This printer. Call the System AdministratorFor this printer. Call the System Administrator Does not exist or you do not have read accessAn exception page can not be added when the Image shift Use You must have write accessAn error occurred while XDS was converting the Job Ticket Serviced by this print server. You may not have enoughFields set to Printer default Set to Printer defaultAn exception page can not be added when the Sides imaged To Printer defaultCode b95p An internal processing error occurred during the printingOperation. You may not have enough memory. Internal error Ticket LibraryBound collated sets must contain between 7 and 125 sheets An invalid insert position has been selectedArgument %s is invalid Argument % is invalid. Skip this argument and continue?Copies must be Bound jobs require a paper length of 11.0 inches 279 mm orInches 297 mm Copies must be 1-16 for uncollated Booklet Maker jobsCopies must be 2-70 for uncollated stapled jobs Copies must be 2-50 for uncollated stapled jobsDelete the selected printer? DefaultCopies must be 7-125 for uncollated bound jobs Covers can not use a paper stock with fields set to PrinterEnter valid numbers in the Tab Position Field Do you wish to reset to the default Job Ticket values?Values? Enter a sender name in the From fieldFailed to print the document. An LPR operation timed out Feature conflicts have been found in the Job Ticket. SelectSetup button When paper stock lengths varyOrder Count must be If Uncollated and ordered Custom paper type are selected,Jobs cannot use more than two ordered stocks No printer connection is selected. a printer connection is One or more stocks have a paper weight that is not betweenJob consisting entirely of transparencies cannot be stapled Or boundRange overlaps an existing range 413 g/m2Only one Chapter Start can be programmed per Ordered stock must have a valuePaper stock width must be from 7.00 to 18.27 inches to Paper stock width must be from 203 mm to 216 mm,Paper stock width must be from 203 mm to 432 mm, Length must be from 254 mm to 363 mmPaper stock widths less than 9.0 inches 229 mm cannot be Paper stock width must be from 8.00 inches to 8.50 inches,Length must be from 10.00 inches to 14.02 inches Paper stock widths cannot vary by more than 0.5 inchesPaper stocks with widths greater than 9.0 inches 229 mm Paper Weight must have a value between 60 and 413 g/m2Inches 363 mm cannot be bound or stapled Paper stocks with a Custom paper type cannot be drilledAccount field cannot begin with a Space NecessaryStapled collated sets must contain between 2 and 50 sheets Stapled collated sets must contain between 2 and 70 sheetsCharacters hyphen-, slash/, asterisk*, plus sign+, number Currently selected printer is now the default printerAccount field may contain upper case alphabetic Characters, numerals 0 through 9, a blank, or the followingJob location Destination and the document file names must differDestination name must not have an extension of XJT Destination of Save or Print & Save requires a valid savedDown or the connection timed out Do not have access rightsNot have access rights. Call the System Administrator Document cannot be copied to the spool directory onFile %s is invalid and can not be dropped System AdministratorEntered page range is invalid Exception Pages range From must be greater than zeroFile containing the printer capabilities cannot be opened Continue?File containing the printer capabilities is corrupted Do not have read access to the file Will fault at the printer. Do you want the Job Name to beSelected printer. Assign defaults to the indicated areas or Cancel the operation?Job Ticket file cannot be found. You must specify a name Be used. To modify those settings, reprogram the Job TicketSetup Job Ticket is invalidMaximum number of Chapter Starts has been defined Directory. Notify the System AdministratorLocal family mask file .MSK for this printer does not exist Or cannot be opened. It should be located in your WindowsNecessary Product Support Library is not loaded. To reinstall XppsNetwork Server configuration file QUEUE.CFG for this Notify the System AdministratorRange values must be Number specified by To exceeds the total numberPages in the job From field. Enter only numeric valuesOverwrite it? Print job was cancelledJob Ticket features could not be determined Print & Save Destination Job Ticket already existsPrinter specified in the file containing the printer Printer setup structure for the Xerox Job Ticket LibraryCould not be created and initialized Printer specified in the connection is not supportedTo a connected printer Selected queue is not configured for Xerox useDocuSP Server Save Destination Job Ticket already exists. Overwrite it?Starting Page must be greater than zero Reinstall XDSInitialized. You may have to reinstall XDS Specified file already exists. Overwrite it?Support libraries required for the Xerox Job Ticket Library Reinstall XppsLibrary could not be loaded. You may have to reinstall Xpps Library are not the most recent version. You may have toTab Positions must be from 1 through Library could not be loaded. You may have to reinstall XDSWeight for Paper stock 1 is not between 60 and 200 g/m2 Tab Control libraries that are required for the Xerox JobX Image Shift must be from -17.0 inches to 6.7 inches, Weight for Paper stock 1 is not between 60 and 413 g/m2Have to reinstall XDS Y Image Shift must be from -14.3 inches to 14.3 inchesImage Shift must be from -372 mm to 372 mm X Image Shift must be from -216 mm to 216 mm, and the YImage Shift must be from -356 mm to 356 mm X Image Shift must be from -432 mm to 170 mm, and the YXerox Document Submission Application cannot load You may have to reinstall XDSAdministrator May have to reinstall XDSApplication is unknown File, XPPPRES.DLL. You may have to reinstall XppsXerox Job Ticket libraries are invalid. You may have to Xerox Job Ticket Library cannot be loaded. The callingFile, XRXUTIL.DLL. You may have to reinstall Xpps This application. You may have to reinstall XDSBe loaded. You may have to reinstall Xpps File, XPPPNET.DLL. You may have to reinstall XppsYou must restart windows and reinstall XDS Library file, XPPPNET.DLL. You may have to reinstall XppsLibraries. You may have to reinstall Xpps Needed to print documents or to setup Job Tickets. SelectAccommodated by this dialog box. You must Change or Delete There was a problem while a window handle was being storedOr retrieved This operation results in more page ranges than can beWindows Check the default stockVersion of software. Some Job Ticket options will not be AvailablePlease check the stocks being used in the Covers dialog Require 1-sided for Sides Imaged. Please check the defaultStocks being used in the Exception Pages dialog box Transparencies require None or Print on Side 1 for PrintingUncollated jobs cannot be sent to the Booklet Maker Or you do not have read accessUsed in the Exception Pages dialog Job was being closed. Resend the jobConventional memory. Close some other applications and try Application that is using Xppp and try againUncollated transparencies cannot be stapled or bound Uncollated transparencies cannot be stapledExit and restart Windows Restart WindowsIs not a Novell NetWare server Minimum rights that are required are Write and Create 49-50 Windows workstation messages File. Retrieve it? Network printer This printer. Call the System Administrator File is corrupted Set to Printer default Ticket Library An invalid insert position has been selected Bound jobs require a paper length of 11.0 inches 279 mm or Copies must be 2-50 for uncollated stapled jobs Copies must be 7-125 for uncollated bound jobs Values? Failed to print the document. An LPR operation timed out If Uncollated and ordered Custom paper type are selected, Job consisting entirely of transparencies cannot be stapled 413 g/m2 Paper stock width must be from 203 mm to 216 mm, Paper stock width must be from 8.00 inches to 8.50 inches, Inches 363 mm cannot be bound or stapled Necessary Account field may contain upper case alphabetic Destination and the document file names must differ Document cannot be copied to the spool directory on System Administrator Continue? Will fault at the printer. Do you want the Job Name to be Job Ticket is invalid Local family mask file .MSK for this printer does not exist Necessary Product Support Library is not loaded. Number specified by To exceeds the total number Print & Save Destination Job Ticket already exists Printer setup structure for the Xerox Job Ticket Library Reprint or Print Server file path should not contain a drive Specified file already exists. Overwrite it? Library are not the most recent version. You may have to Xpps Weight for Paper stock 1 is not between 60 and 413 g/m2 X Image Shift must be from -216 mm to 216 mm, and the Y XDS Xerox Job Ticket libraries are invalid. You may have to Xerox Job Ticket Library, XPPP.DLL, does not recognize Library file, XPPPNET.DLL. You may have to reinstall Xpps There was a problem while a window handle was being stored Version of software. Some Job Ticket options will not be Stocks being used in the Exception Pages dialog box Used in the Exception Pages dialog Uncollated transparencies cannot be stapled or bound Restart Windows Minimum rights that are required are Write and Create 49-50 Application Name could not be printed on LaserWriter Because of a communication error, Document Name fromCould not find the default Job Ticket specified in the User Preferences dialog. Internal defaults will be usedJPM down Problem establishing connection to specified printerQueuing is disabled LaserWriter is disconnected or switched off. Please tryApplication menu or check the PrintMonitor window Want PrintMonitor to adjust its memory size and try again?Selected ticket is not valid. The previous ticket remains Effect50-4 Macintosh workstation messages JPM down Selected ticket is not valid. The previous ticket remains 50-4 Bad Queue Value virtual printer Bad Queue Value No queues configuredCan’t access path Ambiguous value for optionCan’t initialize Sigquit handler Can’t add file to internal table pathCan’t get file from internal table # Can’t initialize Sigint handlerError getting initial working directory Error changing to directory pathError creating temporary data file Error copying STANDARD-INPUTInvalid indirection file Error getting unique data filenameError opening configuration file path JobTicket error for optionJobTicketSetSourceDoc JobTicketOverlayJob TicketSetDispositions Job TicketSetSenderNon-unique option Memory allocation errorLprtab2ps copy file is too large Missing value for optionSetOfDispCreate SetOfDispInsertSystem error Server or directory unreachableUnable to find server name DOS workstation messages Can’t add file to internal table path Couldn’t encode job ticket to file Error getting unique data filename JobTicketOverlay Lprtab2ps copy file is too large Server or directory unreachable Unable to find server name Unix workstation messages Can’t create job ticket file Can’t create job ticketClient software was unable to access the directory using Entering the print command, an invalid option was specified 52-5 Lpr command was entered, but the job is too large. This is a Print request not forwarded 52-8 Unix workstation messages Can’t add file to internal table path Can’t open local printer file path Error copying STANDARD-INPUT JobTicketDecodeAXJT JTDocumentterCreate Print request not forwarded Unable to find listfile