Xerox 4090 NPS, 4890 NPS, 4850 NPS, 4050 NPS manual 48-32

PRINTER CONTROLLER MESSAGES

Message

H338 ESV2 drift fault.

H340 Excessive charge loss from charge dicorotron to ESV1.

H341 Excessive charge loss from ESV1 to ESV2.

H344 Convergence timeout (charge, BE mode) possible photoreceptor problem.

H345 Convergence timeout (charge area) possible photoreceptor or cleaning problem.

H346 Convergence timeout (charge, TL mode) possible photoreceptor problem.

H347 Convergence timeout (modulated) ROS modulated intensity at maximum.

H348 Convergence timeout (modulated) possible cleaning problem.

H350 Convergence timeout (discharge) ROS discharge intensity at maximum.

H351 Convergence timeout (discharge, discharge area).

H353 Electrostatic set-points out of range, possible massive cleaning problem.

Explanation/action

An ESV2 drift fault has been detected.

1.Press the Continue button.

2.If problem persists, notify your service representative.

An excessive charge loss from charge dicorotron to ESV1 has been detected.

1.Press the Continue button.

2.If problem persists, notify your service representative.

An excessive charge loss from ESV1 to ESV2 has been detected.

1.Press the Continue button.

2.If problem persists, notify your service representative. A convergence timeout has occurred.

1.Press the Continue button.

2.If problem persists, notify your service representative. A convergence timeout has occurred.

1.Press the Continue button.

2.If problem persists, notify your service representative. A convergence timeout has occurred.

1.Press the Continue button.

2.If problem persists, notify your service representative. A convergence timeout has occurred.

1.Press the Continue button.

2.If problem persists, notify your service representative. A convergence timeout has occurred.

1.Press the Continue button.

2.If problem persists, notify your service representative. A convergence timeout has occurred.

1.Press the Continue button.

2.If problem persists, notify your service representative. A convergence timeout has occurred.

1.Press the Continue button.

2.If problem persists, notify your service representative.

Electrostatic set-points out of range, possible massive cleaning problem.

1.Press the Continue button.

2.If problem persists, notify your service representative.

48-32 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE