Xerox 4850 NPS manual Can’t add file to internal table path, Can’t get file from internal table #

DOS WORKSTATION MESSAGES

	Can’t add file to internal table: <path>
	There is an internal error, probably due to a lack of memory.
Action	Write down the message. Contact your system administrator and
	verify that your system meets the minimum configuration
	requirements. If problem persists, contact your service
	representative.

	Can’t get file from internal table: <#>
	There is an internal error, probably due to a lack of memory.
Action	Write down the message. Contact your system administrator and
	verify that your system meets the minimum configuration
	requirements.

	Can’t initialize SIGINT handler
	Your software has an internal error.
Action	Write down the message and contact your system administrator.
	Can’t initialize SIGQUIT handler
	Your software has an internal error.
Action	Write down the message and contact your system administrator.
	Can’t open job ticket file: <path>
	The DocuPrint NPS printer is unable to access the job ticket using the
	pathname you specified.
Action	Check the pathname you specified, and correct it if necessary. Make
	sure that you have read access to the file.
	Can’t open local printer file: <path>
	Your software is missing an internal file that is needed for printing.
Action	Verify that the directory /usr/spool/xerox/qtmp exists and that you
	have read and write access to it. Ask your system administrator to
	verify that the client software was loaded properly.
	Can’t pop file from internal table: <#>
	There is an internal error, probably due to a lack of memory.
Action	Write down the message. Contact your system administrator and
	verify that your system meets the minimum configuration
	requirements.

51-2 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE