Xerox 4850 NPS, 4090 NPS, 4890 NPS Lpr command was entered, but the job is too large. This is a

UNIX WORKSTATION MESSAGES

	JTDocumentter__Create()
	The print command was entered, but an internal error occurred.
Action	Write down the message and contact your service representative.
	JTDocumentter__Next()
	The print command was entered, but an internal error occurred.
Action	Write down the message and contact your service representative.
	lpr:tab__2__ps: copy file is too large
	The lpr command was entered, but the job is too large. This is a
	limitation of the command, not of the DocuPrint print job utility.
Action	Resubmit the job using the lpr -s switch command
	Memory allocation error:
	The print command was entered, but an internal error occurred due
	to a lack of memory.
Action	Write down the message. Contact your system administrator and
	verify that your system meets the minimum configuration
	requirements.
	Missing value for option
	The print command was entered, but it did not include a necessary
	value for a print option specified.
Action	Refer to the Guide to Submitting Jobs from the Client for acceptable
	values for the options.
	Non-unique option:
	The print command was entered, but it did not include a necessary
	value for a print option specified.
Action	Refer to the Guide to Submitting Jobs from the Client for acceptable
	values for the options.
	Print queue name must be specified
	The -printerName queue option was not included on the command
	line when the job was submitted.
Action	Reenter the print command, making sure to include the -printerName
	queue option.

52-6 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE