Manuals / Xerox / Computer Equipment / Printer

Xerox 4850 NPS, 4090 NPS, 4890 NPS manual Version of software. Some Job Ticket options will not be

Models: 4050 NPS 4850 NPS 4090 NPS 4890 NPS

1 248

Download 248 pages 10.85 Kb

Page 202

WINDOWS WORKSTATION MESSAGES

	This print queue resides on a file server containing a previous
	version of software. Some Job Ticket options will not be
	available.
	The print queue that you have added to the list of available printers
	or that you have selected from the list of available printers does not
	contain the most recent version of the Network Server software.
	Some of the Job Ticket features in the Setup dialog will not be
	available.
Source	DocuPrint print driver
Action	If you wish to use the new features available in the Setup dialog, you
	must connect to a print queue that resides on a Network Server that
	has version 1.2, or higher, of the software.

	This version of XDS requires at least version 3.1 of Microsoft
	Windows.
	You attempted to access the XDS software from Windows 3.0 or
	lower.
Source	DocuPrint print driver
Action	The XDS software version 1.1 requires at least version 3.1 of
	Windows. Contact your System Administrator to either reinstall the
	XPPS software version 1.0 or to install Windows 3.1.

	Transparencies or Tab paper stock types cannot be wider than
	9.0 inches (229 mm) or longer than 14.0 inches (356 mm).
	You specified an invalid paper size for the paper stock option. If you
	select [Transparency] or a paper stock with tabs, you cannot specify
	a paper size wider than 9.0 inches (229 mm), or longer than 14.3
	inches (363 mm).
Source	DocuPrint print driver
Action	Select another paper size and make sure that it is less than 9.0
	inches (229 mm) wide, and 14.3 inches (363 millimeters) long.

	Transparencies require “1-sided” for Sides Imaged. Please
	check the default stock.
	[Transparency] was selected as a paper stock option but [2-Sided] or
	[Head-to-Toe] was selected in the Sides Imaged list box.
Source	DocuPrint Print Submission software
Action	If you select [Transparency] as one of your paper stock options,
	select [1-Sided] in the Sides Imaged list box.

49-44

XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE

Image 202

Xerox 4850 NPS, 4090 NPS, 4890 NPS, 4050 NPS manual Version of software. Some Job Ticket options will not be

Contents

Version 7.1 August 2000 721P86941 Page Version 7.1 August 2000 721P86941 Page Laser safety Xerox Docuprint 4050/4090/4850/4890/92C NPS Messages Guide Laser safety Xerox Docuprint 4050/4090/4850/4890/92C NPS Messages Guide Table of Contents Page Table of Contents Page Introduction Conventions Xerox DocuPrint Network Printer Series Page Introduction Conventions Xerox DocuPrint Network Printer Series Page Printer Controller messages Message Explanation/action48-3 48-4 48-5 48-6 48-7 48-8 Message Explanation/action Messages using Show Status PS-adminShow StatusQueuing is Started Scheduling Policy resourceMatch PS-admin C076 Sfrs 48-14 Clear areas 1A and 2A 48-16 48-17 Clear area 2a 48-19 48-20 48-21 48-22 48-23 Bin #1 sensor 48-25 48-26 48-27 48-28 48-29 48-30 48-31 48-32 48-33 Loss of some supply voltage to XER 48-35 48-36 48-37 Type PSP 48-40 48-41 General system messages Memory System Communication FAULT, see Message AT CRT Printer Controller messages 48-2 48-3 48-4 48-5 48-6 48-7 48-8 Message Explanation/action Messages using Show Status Message C076 Message Explanation/action 48-14 Clear areas 1A and 2A 48-16 48-17 Message Explanation/action 48-19 Message 48-21 48-22 48-23 Bin #1 sensor 48-25 Message Explanation/action 48-27 48-28 48-29 Message 48-31 48-32 48-33 Loss of some supply voltage to XER Message 48-36 48-37 Type PSP 48-40 Message Explanation/action General system messages Memory System Communication FAULT, see Message AT CRT Job Name is Required Fatal memory error has occurred. Close some applicationsRestart the Xpps application Job Ticket must have an extension of .XJTProblem occurred while the dropped file names were being Problem occurred while the command-line arguments wereCancelled Read. There may be a memory problem. The operation isNetwork printer An entry using this page already existsAn error occurred while attempting to free allocate global Close some applications or add more memoryDoes not exist or you do not have read access This printer. Call the System AdministratorFor this printer. Call the System Administrator An error occurred while the file containing the printerServiced by this print server. You may not have enough You must have write accessAn error occurred while XDS was converting the Job Ticket An exception page can not be added when the Image shift UseTo Printer default Set to Printer defaultAn exception page can not be added when the Sides imaged Fields set to Printer defaultTicket Library An internal processing error occurred during the printingOperation. You may not have enough memory. Internal error Code b95pArgument % is invalid. Skip this argument and continue? An invalid insert position has been selectedArgument %s is invalid Bound collated sets must contain between 7 and 125 sheetsCopies must be 1-16 for uncollated Booklet Maker jobs Bound jobs require a paper length of 11.0 inches 279 mm orInches 297 mm Copies must beCopies must be 2-50 for uncollated stapled jobs Copies must be 2-70 for uncollated stapled jobsCovers can not use a paper stock with fields set to Printer DefaultCopies must be 7-125 for uncollated bound jobs Delete the selected printer?Enter a sender name in the From field Do you wish to reset to the default Job Ticket values?Values? Enter valid numbers in the Tab Position FieldWhen paper stock lengths vary Feature conflicts have been found in the Job Ticket. SelectSetup button Failed to print the document. An LPR operation timed outOrder Count must be If Uncollated and ordered Custom paper type are selected,Jobs cannot use more than two ordered stocks Or bound One or more stocks have a paper weight that is not betweenJob consisting entirely of transparencies cannot be stapled No printer connection is selected. a printer connection isOrdered stock must have a value 413 g/m2Only one Chapter Start can be programmed per Range overlaps an existing rangeLength must be from 254 mm to 363 mm Paper stock width must be from 203 mm to 216 mm,Paper stock width must be from 203 mm to 432 mm, Paper stock width must be from 7.00 to 18.27 inches toPaper stock widths cannot vary by more than 0.5 inches Paper stock width must be from 8.00 inches to 8.50 inches,Length must be from 10.00 inches to 14.02 inches Paper stock widths less than 9.0 inches 229 mm cannot bePaper stocks with a Custom paper type cannot be drilled Paper Weight must have a value between 60 and 413 g/m2Inches 363 mm cannot be bound or stapled Paper stocks with widths greater than 9.0 inches 229 mmStapled collated sets must contain between 2 and 70 sheets NecessaryStapled collated sets must contain between 2 and 50 sheets Account field cannot begin with a SpaceCharacters, numerals 0 through 9, a blank, or the following Currently selected printer is now the default printerAccount field may contain upper case alphabetic Characters hyphen-, slash/, asterisk*, plus sign+, numberDestination of Save or Print & Save requires a valid saved Destination and the document file names must differDestination name must not have an extension of XJT Job locationDocument cannot be copied to the spool directory on Do not have access rightsNot have access rights. Call the System Administrator Down or the connection timed outException Pages range From must be greater than zero System AdministratorEntered page range is invalid File %s is invalid and can not be droppedFile containing the printer capabilities cannot be opened Continue?File containing the printer capabilities is corrupted Cancel the operation? Will fault at the printer. Do you want the Job Name to beSelected printer. Assign defaults to the indicated areas or Do not have read access to the fileJob Ticket is invalid Be used. To modify those settings, reprogram the Job TicketSetup Job Ticket file cannot be found. You must specify a nameOr cannot be opened. It should be located in your Windows Directory. Notify the System AdministratorLocal family mask file .MSK for this printer does not exist Maximum number of Chapter Starts has been definedNotify the System Administrator To reinstall XppsNetwork Server configuration file QUEUE.CFG for this Necessary Product Support Library is not loaded.From field. Enter only numeric values Number specified by To exceeds the total numberPages in the job Range values must bePrint & Save Destination Job Ticket already exists Print job was cancelledJob Ticket features could not be determined Overwrite it?Printer specified in the connection is not supported Printer setup structure for the Xerox Job Ticket LibraryCould not be created and initialized Printer specified in the file containing the printerSave Destination Job Ticket already exists. Overwrite it? Selected queue is not configured for Xerox useDocuSP Server To a connected printerSpecified file already exists. Overwrite it? Reinstall XDSInitialized. You may have to reinstall XDS Starting Page must be greater than zeroLibrary are not the most recent version. You may have to Reinstall XppsLibrary could not be loaded. You may have to reinstall Xpps Support libraries required for the Xerox Job Ticket LibraryTab Control libraries that are required for the Xerox Job Library could not be loaded. You may have to reinstall XDSWeight for Paper stock 1 is not between 60 and 200 g/m2 Tab Positions must be from 1 throughY Image Shift must be from -14.3 inches to 14.3 inches Weight for Paper stock 1 is not between 60 and 413 g/m2Have to reinstall XDS X Image Shift must be from -17.0 inches to 6.7 inches,X Image Shift must be from -432 mm to 170 mm, and the Y X Image Shift must be from -216 mm to 216 mm, and the YImage Shift must be from -356 mm to 356 mm Image Shift must be from -372 mm to 372 mmMay have to reinstall XDS You may have to reinstall XDSAdministrator Xerox Document Submission Application cannot loadXerox Job Ticket Library cannot be loaded. The calling File, XPPPRES.DLL. You may have to reinstall XppsXerox Job Ticket libraries are invalid. You may have to Application is unknownFile, XPPPNET.DLL. You may have to reinstall Xpps This application. You may have to reinstall XDSBe loaded. You may have to reinstall Xpps File, XRXUTIL.DLL. You may have to reinstall XppsNeeded to print documents or to setup Job Tickets. Select Library file, XPPPNET.DLL. You may have to reinstall XppsLibraries. You may have to reinstall Xpps You must restart windows and reinstall XDSThis operation results in more page ranges than can be There was a problem while a window handle was being storedOr retrieved Accommodated by this dialog box. You must Change or DeleteAvailable Check the default stockVersion of software. Some Job Ticket options will not be WindowsTransparencies require None or Print on Side 1 for Printing Require 1-sided for Sides Imaged. Please check the defaultStocks being used in the Exception Pages dialog box Please check the stocks being used in the Covers dialogJob was being closed. Resend the job Or you do not have read accessUsed in the Exception Pages dialog Uncollated jobs cannot be sent to the Booklet MakerUncollated transparencies cannot be stapled Application that is using Xppp and try againUncollated transparencies cannot be stapled or bound Conventional memory. Close some other applications and tryExit and restart Windows Restart WindowsIs not a Novell NetWare server Minimum rights that are required are Write and Create 49-50 Windows workstation messages File. Retrieve it? Network printer This printer. Call the System Administrator File is corrupted Set to Printer default Ticket Library An invalid insert position has been selected Bound jobs require a paper length of 11.0 inches 279 mm or Copies must be 2-50 for uncollated stapled jobs Copies must be 7-125 for uncollated bound jobs Values? Failed to print the document. An LPR operation timed out If Uncollated and ordered Custom paper type are selected, Job consisting entirely of transparencies cannot be stapled 413 g/m2 Paper stock width must be from 203 mm to 216 mm, Paper stock width must be from 8.00 inches to 8.50 inches, Inches 363 mm cannot be bound or stapled Necessary Account field may contain upper case alphabetic Destination and the document file names must differ Document cannot be copied to the spool directory on System Administrator Continue? Will fault at the printer. Do you want the Job Name to be Job Ticket is invalid Local family mask file .MSK for this printer does not exist Necessary Product Support Library is not loaded. Number specified by To exceeds the total number Print & Save Destination Job Ticket already exists Printer setup structure for the Xerox Job Ticket Library Reprint or Print Server file path should not contain a drive Specified file already exists. Overwrite it? Library are not the most recent version. You may have to Xpps Weight for Paper stock 1 is not between 60 and 413 g/m2 X Image Shift must be from -216 mm to 216 mm, and the Y XDS Xerox Job Ticket libraries are invalid. You may have to Xerox Job Ticket Library, XPPP.DLL, does not recognize Library file, XPPPNET.DLL. You may have to reinstall Xpps There was a problem while a window handle was being stored Version of software. Some Job Ticket options will not be Stocks being used in the Exception Pages dialog box Used in the Exception Pages dialog Uncollated transparencies cannot be stapled or bound Restart Windows Minimum rights that are required are Write and Create 49-50 Preferences dialog. Internal defaults will be used Because of a communication error, Document Name fromCould not find the default Job Ticket specified in the User Application Name could not be printed on LaserWriterLaserWriter is disconnected or switched off. Please try Problem establishing connection to specified printerQueuing is disabled JPM downEffect Want PrintMonitor to adjust its memory size and try again?Selected ticket is not valid. The previous ticket remains Application menu or check the PrintMonitor window50-4 Macintosh workstation messages JPM down Selected ticket is not valid. The previous ticket remains 50-4 Ambiguous value for option Bad Queue Value No queues configuredCan’t access path Bad Queue Value virtual printerCan’t initialize Sigint handler Can’t add file to internal table pathCan’t get file from internal table # Can’t initialize Sigquit handlerError copying STANDARD-INPUT Error changing to directory pathError creating temporary data file Error getting initial working directoryJobTicket error for option Error getting unique data filenameError opening configuration file path Invalid indirection fileJob TicketSetSender JobTicketOverlayJob TicketSetDispositions JobTicketSetSourceDocMissing value for option Memory allocation errorLprtab2ps copy file is too large Non-unique optionServer or directory unreachable SetOfDispInsertSystem error SetOfDispCreateUnable to find server name DOS workstation messages Can’t add file to internal table path Couldn’t encode job ticket to file Error getting unique data filename JobTicketOverlay Lprtab2ps copy file is too large Server or directory unreachable Unable to find server name Unix workstation messages Can’t create job ticket Can’t create job ticket fileClient software was unable to access the directory using Entering the print command, an invalid option was specified 52-5 Lpr command was entered, but the job is too large. This is a Print request not forwarded 52-8 Unix workstation messages Can’t add file to internal table path Can’t open local printer file path Error copying STANDARD-INPUT JobTicketDecodeAXJT JTDocumentterCreate Print request not forwarded Unable to find listfile