Xerox 4090 NPS, 4890 NPS, 4850 NPS, 4050 NPS manual Message

PRINTER CONTROLLER MESSAGES

Message

F006 XER lost machine clock.

F007 PHR lost machine clock.

F008 CDM lost pitch reset.

F009 MIR lost pitch reset.

F010 XER lost pitch reset.

F011 PHR lost registration finger signal.

F030 Low fuser pressure after

3 consecutive readings during a job.

Explanation/action

1.Discard purged output.

2.Press the Continue button.

3.If the problem persists, call your service representative.

There is a CPM, MIR or XER board failure. The XER machine clock passes through MIR. There may also be a harness problem between CPM and MIR or MIR and XER.

1.Discard purged output.

2.Press the Continue button.

3.If the problem persists, call you service representative.

There is a CPM or PHR board failure or a machine clock signal between CPM and PHR.

1.Discard purged output.

2.Press the Continue button.

3.If problem persists, notify your service representative.

There is a PHR or CDM board failure or a harness problem between PHR and CDM.

1.Discard purged output.

2.Press the Continue button.

3.If problem persists, notify your service representative.

There is a CPM or MIR board failure or a harness problem between CPM and MIR.

1.Discard purged output.

2.Press the Continue button.

3.If problem persists, notify your service representative. There is a CPM, MIR, or XER board failure.

1.Discard purged output.

2.Press the Continue button.

3.If problem persists, notify your service representative.

There is a registration finger switch and tab problem, a PHB board failure, or a harness problem between the registration finger switch and PHR.

1.Discard purged output.

2.Press the Continue button.

3.If problem persists, notify your service representative. The fuser pressure is too low.

1.Discard unfused copy.

2.Press continue.

3.If problem persists, notify your service representative.

48-20 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE