Lexmark X748DE, 34TT027 Serial x menu, Understanding the printer menus 155, Protocol, Honor Init

Understanding the printer menus		155
	Use	To
	Protocol	Specify the parallel port protocol.
	Standard	Notes:
	Fastbytes
		• Fastbytes is the factory default setting. It provides compatibility with most
		existing parallel ports and is the recommended setting.
		• Standard tries to resolve parallel port communication problems.
	Honor Init	Determine if the printer honors printer hardware initialization requests from the
	On	computer.
	Off	Notes:
		• Off is the factory default setting.
		• The computer requests initialization by activating the Init signal from the
		parallel port. Many personal computers activate the Init signal each time the
		computer is turned on.
	Parallel Mode 2	Determine if the parallel port data is sampled on the leading or trailing edge of a
	On	strobe.
	Off	Note: On is the factory default setting.
	Mac Binary PS	Set the printer to process Macintosh binary PostScript print jobs.
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• Off filters print jobs using the standard protocol.
		• On processes raw binary PostScript print jobs.
	ENA Address	Set the network address information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Set the netmask information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Set the gateway information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.

Serial [x] menu

Note: This menu appears only when an optional serial card is installed.