Lexmark 34TT027, 34TT001, X748x, X746de, X746x, X748DE manual Understanding the printer menus 162

Understanding the printer menus		162
	Use	To
	Wiping Mode	Specify the mode for disk wiping.
	Off	Note: Auto is the factory default setting. The printer determines when to initiate a
	Auto	disk wipe.
	Manual
	Scheduled Wiping	Set the schedule for disk wiping.
	Time	Notes:
	Day
		• Time is used to set the time for scheduled wiping.
		• Day is used to set the specific day or period for scheduled wiping. Select from
		the following options: Sunday to Friday, Everyday, Weekdays, and Weekends.
		• Scheduled wipes are initiated without displaying a user warning or
		confirmation message.
		• Both manual and scheduled wiping allow the file system to reuse marked disk
		space without first having to wipe it.
	Manual Wiping	Overwrite the disk space that has been used to hold data from a processed print job.
	Start now	This type of wiping does not erase any information related to an unprocessed print
	Do not start now	job.
		Notes:
		• “Do not start now“ is the factory default setting.
		• If the Disk Wiping access control is activated, then a user must successfully
		authenticate and have the required authorization in order to initiate the disk
		wipe.
	Automatic Method	Mark the disk space used by a previous print job. This method does not permit the
	Single pass	file system to reuse this space until it has been cleared.
	Multiple pass	Notes:
		• “Single pass” is the factory default setting.
		• Only automatic wiping enables users to activate disk wiping without having to
		turn the printer off for an extended amount of time.
		• Wipe highly confidential information using only the Multiple pass method.
	Manual Method	Allow the file system to reuse marked disk space without having to wipe it first.
	Single pass	Notes:
	Multiple pass
		• “Single pass” is the factory default setting.
		• Highly confidential information should be wiped using the Multiple pass
		method only.
	Scheduled Method	Allow the file system to reuse marked disk space without having to wipe it first.
	Single pass	Note: “Single pass” is the factory default setting.
	Multiple pass