Lexmark X748x, 34TT027, 34TT001, X746de, X746x, X748DE manual Understanding the printer menus 206

Understanding the printer menus		206
	Use	To
	Print Resolution	Specify the printed output resolution.
	1200 dpi	Note: 4800 CQ is the factory default setting.
	4800 CQ
	Toner Darkness	Lighten or darken the printed output.
	1–5	Notes:
		• 4 is the factory default setting.
		• Selecting a smaller number can help conserve toner.
		• If Print Mode is set to Black Only, then a setting of 5 increases toner density and
		darkness to all print jobs.
		• If Print Mode is set to Color, then a setting of 5 is the same as a setting of 4.
	Enhance Fine Lines	Enable a print mode preferable for files such as architectural drawings, maps, electrical
	On	circuit diagrams, and flow charts.
	Off	Notes:
		• Off is the factory default setting.
		• To set Enhance Fine Lines from the software program, with a document open,
		click File > Print, and then click Properties, Preferences, Options, or Setup.,
		• To set Enhance Fine Lines using the Embedded Web Server, open a Web browser,
		and then type the IP address of the printer in the address field.
	Color Saver	Reduce the amount of toner used for graphics and images. The amount of toner used
	On	for text is not reduced.
	Off	Notes:
		• Off is the factory default setting.
		• On overrides Toner Darkness settings.
	RGB Brightness	Adjust brightness in color outputs.
	‑6 to 6	Notes:
		• 0 is the factory default setting.
		• This does not affect files where CMYK color specifications are being used.
	RGB Contrast	Adjust contrast in color outputs.
	0–5	Notes:
		• 0 is the factory default setting.
		• This does not affect files where CMYK color specifications are being used.
	RGB Saturation	Adjust saturation in color outputs.
	0–5	Notes:
		• 0 is the factory default setting.
		• This does not affect files where CMYK color specifications are being used.