Lexmark 34TT027, 34TT001, X748x Custom Scan Sizes menu, Custom Names menu, Universal Setup menu

Understanding the printer menus 144

Custom Scan Sizes menu

Use	To
Custom Scan Size [x]	Specify a custom scan size name, scan sizes, and options. The custom scan size
Scan Size Name	name replaces Custom Scan Size [x] in the printer menus.
Width	Notes:
1–11.69 inches (25–297 mm)	• 11.69 inches is the US factory default setting for Width. 297 millimeters
Height
	is the international factory default setting for Width.
1–17 inches (25–432 mm)
	• 17 inches is the US factory default setting for Height. 432 millimeters is
Orientation
	the international factory default setting for Height.
Portrait
	• Portrait is the factory default setting for Orientation.
Landscape
	• Off is the factory default setting for “2 scans per side.”
2 scans per side
Off
On

Custom Names menu

Use	To
Custom Name [x]	Specify a custom name for a paper type. This name replaces Custom Type [x] in
[none]	the printer menus.

Universal Setup menu

Use	To
Units of Measure	Specify the unit of measure.
Inches	Note: Inches is the US factory default setting. Millimeters is the
Millimeters	international factory default setting.
Portrait Width	Set the width for a portrait page orientation.
3–48 inches	Notes:
76–1219 mm
	• 8.5 inches is the US factory default setting. 216 mm is the
	international factory default setting.
	• If the specified width exceeds the maximum, then the printer uses
	the maximum width allowed.
	• The width can be increased in 0.01-inch or in 1-mm increments.
Portrait Height	Set the height for a portrait page orientation.
3–48 inches	Notes:

76–1219 mm

•14 inches is the US factory default setting. 356 mm is the international factory default setting.

•If the specified height exceeds the maximum, then the printer uses the maximum height allowed.

•The height can be increased in 0.01-inch or in 1-mm increments.