Lexmark X746de, 34TT027, 34TT001, X748x Adjusting Sleep mode, Saving money and the environment 219

Saving money and the environment		219
	Use	To
	On	Reduce printer noise.
		• Print jobs will process at a reduced speed.
		• Printer engine motors do not start until a document is
		ready to print. There will be a short delay before the
		first page is printed.
		• If your printer has faxing capability, then fax sounds are
		reduced or disabled, including those made by the fax
		speaker and ringer. The fax is placed in standby mode.
		• The alarm control and cartridge alarm sounds are
		turned off.
		• The printer will ignore the Advance Start command.
	Off	Use factory default settings. This setting supports the
	Note: Selecting Photo from the printer driver may disable	performance specifications of the printer.
	Quiet Mode and provide better print quality and full
	speed printing.
3 Click Submit.

Adjusting Sleep mode

To save energy, decrease the number of minutes the printer waits before it enters Sleep mode. Available settings range from 1–180 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > General Settings > Timeouts.

3In the Sleep Mode field, enter the number of minutes you want for the printer to wait before it enters Sleep Mode.

4Click Submit.

Using the printer control panel

1From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2In the Sleep Mode field, select the number of minutes you want for the printer to wait before it enters Sleep Mode.

3Touch .