Lexmark X746x, 34TT027 Miscellaneous Security Settings menu, Understanding the printer menus 160

Understanding the printer menus 160

Miscellaneous Security Settings menu

Use	To
Login Restrictions	Limit the number and time frames of failed login attempts from the printer control
Login failures	panel before all users are locked out.
Failure time frame	Notes:
Lockout time	• “Login failures” specifies the number of failed login attempts before users are
Panel Login Timeout
	locked out. Settings range from 1–10 attempts. 3 attempts is the factory
Remote Login Timeout
	default setting.
	• “Failure time frame” specifies the time frame during which failed login
	attempts can be made before users are locked out. Settings range from 1–60
	minutes. 5 minutes is the factory default setting.
	• “Lockout time” specifies how long users are locked out after exceeding the
	login failures limit. Settings range from 1–60 minutes. 5 minutes is the factory
	default setting. 1 indicates the printer does not impose a lockout time.
	• “Panel Login Timeout” specifies how long the printer remains idle on the home
	screen before automatically logging off the user. Settings range from 1–900
	seconds. 30 seconds is the factory default setting.
	• “Remote Login Timeout” specifies how long a remote interface remains idle
	before automatically logging off the user. Settings range from 1–120 minutes.
	10 minutes is the factory default setting.
Security Reset Jumper	Adjust the security settings.
Access controls=”No Security”	Notes:
No Effect
	• “Access controls=’No Security’” retains all the security information that the
Reset factory security defaults
	user has defined. “No Security" is the factory default setting.
	• “No Effect” means the reset has no effect on the printer security
	configuration.
	• “Reset factory security defaults” deletes all security information that the user
	has defined, and restores the factory default settings in the Miscellaneous
	Security menu.
LDAP Certificate Verification	Allow the user to request a server certificate.
Demand	Notes:
Try
	• “Demand” means a server certificate is requested. If a bad certificate is
Allow
	provided or if no certificate is provided, then the session is terminated
Never
	immediately. “Demand” is the factory default setting.
	• “Try” means a server certificate is requested. If no certificate is provided, then
	the session proceeds normally. If a bad certificate is provided, then the session
	is terminated immediately.
	• “Allow” means a server certificate is requested. If no certificate is provided,
	then the session proceeds normally. If a bad certificate is provided, then it will
	be ignored and the session proceeds normally.
	• “Never” means no server certificate is requested.
Minimum PIN Length	Limit the digit length of the personal identification number (PIN).
1–16	Note: 4 is the is the factory default setting.