Lexmark 34TT001 Change paper source to custom string, Close front door, Close top access cover

Troubleshooting 271

Change [paper source] to [custom string]

Try one or more of the following:

•From the printer control panel, touch Use current [paper source] to ignore the message and print from the selected tray.

•Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then touch Paper loaded, continue.

•Touch Reset active bin to reset the active tray for a linked set of trays.

Note: This applies only to printers with tray linking capability.

•Touch Cancel job to cancel the print job.

Change [paper source] to [paper type] [paper size]

Try one or more of the following:

•From the printer control panel, touch Use current [paper source] to ignore the message and print from the selected tray.

•Load the correct paper size and type in the tray, verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then touch Paper loaded, continue.

•Touch Reset active bin to reset the active tray for a linked set of trays.

Note: This applies only to printers with tray linking capability.

•Touch Cancel job to cancel the print job.

Close front door

Close the front door of the printer.

Close top access cover

Close the printer top access cover to clear the message.

Disk corrupted

The printer attempted to recover data on a corrupted hard disk. The printer hard disk cannot be repaired. From the home screen, touch Format disk to reformat the printer hard disk and clear the message. Note: Formatting deletes all the files stored in the printer hard disk.

Disk full, scan job canceled

Try one or more of the following:

•Touch Continue to clear the message and continue scanning.

•Delete fonts, macros, and other data stored in the printer hard disk.

•Install a hard disk with higher capacity.