Additional printer setup

30

Installing a memory card

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

An optional memory card can be purchased separately and attached to the system board.

1Access the system board.

For more information, see “Accessing the system board” on page 26. Note: This task requires a flathead screwdriver.

2Unpack the memory card.

Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may cause damage.

3Open the memory card connector latches.

Page 30
Image 30
Lexmark 34TT027, 34TT001, X748x, X746de, X746x, X748DE manual Installing a memory card