Lexmark 34TT027, 34TT001, X748x, X746de, X746x Utilities menu, Understanding the printer menus 210

Understanding the printer menus 210

Utilities menu

Use	To
Remove Held Jobs	Delete confidential and held jobs from the printer hard disk.
Confidential	Notes:
Held
	• Selecting a setting affects only print jobs that are resident in the printer.
Not Restored
	Bookmarks, print jobs on flash drives, and other types of held jobs are not
All
	affected.
	• Not Restored removes all Print and Hold jobs that are not restored from the
	printer hard disk or memory.
Format Flash	Format the flash memory.
Yes	Warning—Potential Damage: Do not turn off the printer while the flash memory is
No	being formatted.
	Notes:
	• Yes deletes all data stored in flash memory.
	• No cancels the format request.
	• Flash memory refers to the memory added by installing a flash memory card in
	the printer.
	• The flash memory option card must not be read/write‑ or write‑protected.
	• This menu item appears only when a non‑defective flash memory card is
	installed.
Delete Downloads on Disk	Delete downloads from the printer hard disk, including all held jobs, buffered jobs,
Delete Now	and parked jobs.
Do Not Delete	Notes:
	• Delete Now sets the printer to delete the downloads and allows the display to
	return to the originating screen after the deletion.
	• Do Not Delete sets the printer display to return to the main Utilities menu for
	touch‑screen printer models. When selected in non‑touch‑screen printer
	models, Do Not Delete sets the printer to return to the originating screen after
	the deletion.
Activate Hex Trace	Assist in isolating the source of a print job problem.
	Notes:
	• When activated, all data sent to the printer is printed in hexadecimal and
	character representation, and control codes are not executed.
	• To exit or deactivate Hex Trace, turn off or reset the printer.
Coverage Estimator	Provide an estimate of the percentage coverage of toner on a page. The estimate is
Off	printed on a separate page at the end of each print job.
On	Note: Off is the factory default setting.