Lexmark X748DE, 34TT027, 34TT001, X748x, X746de Understanding the printer menus 173, Print Recovery

Understanding the printer menus		173
	Use	To
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255	Notes:
		• 90 is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the printer checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535	• 40 is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation. This setting has no effect on PCL
		emulation print jobs.
	Timeouts	Set the amount of time the printer waits for user intervention
	Job Hold Timeout	before it holds jobs that require unavailable resources and
	5–255	continues to print other jobs in the print queue.
		Notes:
		• 30 is the factory default setting.
		• This menu appears only when a printer hard disk is installed.
	Print Recovery	Let the printer automatically continue printing from certain offline
	Disabled	situations when not resolved within the specified time period.
	Auto Continue	Note: Disabled is the factory default setting.
	5–255
	Print Recovery	Specify whether the printer reprints jammed pages.
	Jam Recovery	Notes:
	Auto
		• Auto is the factory default setting. The printer reprints
	On
		jammed pages unless the memory required to hold the
	Off
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.
	Print Recovery	Print a page that may not have printed otherwise.
	Page Protect	Notes:
	Off
		• Off is the factory default setting. Off prints a partial page
	On
		when there is not enough memory to print the whole page.
		• On sets the printer to process the whole page so that the
		entire page prints.