Lexmark X748DE, 34TT027, 34TT001, X748x, X746de, X746x manual Understanding the printer menus 149

Understanding the printer menus		149
	Use	To
	Set Hostname	Set the current TCP/IP host name.
		Note: This can be changed only from the Embedded Web Server.
	IP Address	View or change the current TCP/IP address.
		Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
		settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
		support BOOTP and RARP.
	Netmask	View or change the current TCP/IP netmask.
	Gateway	View or change the current TCP/IP gateway.
	Enable DHCP	Specify the DHCP address and parameter assignment setting.
	On	Note: On is the factory default setting.
	Off
	Enable RARP	Specify the RARP address assignment setting.
	On	Note: On is the factory default setting.
	Off
	Enable BOOTP	Specify the BOOTP address assignment setting.
	On	Note: On is the factory default setting.
	Off
	Enable Auto IP	Specify the Zero Configuration Networking setting.
	Yes	Note: Yes is the factory default setting.
	No
	Enable FTP/TFTP	Enable the built-in FTP server, which lets you send files to the printer using File Transfer
	Yes	Protocol.
	No	Note: Yes is the factory default setting.
	Enable HTTP Server	Enable the built-in Web server (Embedded Web Server). When enabled, you can
	Yes	monitor and manage the printer remotely using a Web browser.
	No	Note: Yes is the factory default setting.
	WINS Server Address	View or change the current WINS server address.
	Enable DDNS	View or change the current DDNS setting
	Yes	Note: Yes is the factory default setting.
	No
	Enable mDNS	View or change the current mDNS setting.
	Yes	Note: Yes is the factory default setting.
	No
	DNS Server Address	View or change the current DNS server address.
	Enable HTTPS	View or change the current HTTPS setting.
	Yes	Note: Yes is the factory default setting.
	No