Lexmark X746de, 34TT027, 34TT001, X748x Fax Station Number not set up, Insert Tray, Install Tray

Troubleshooting 273

Fax Station Number not set up

The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly.

Try one or more of the following:

•Touch Continue to clear the message.

•Complete the Analog Fax Setup. If the message appears again, contact your system support person.

Insert Tray [x]

Insert the specified tray into the printer.

Install Tray [x]

Try one or more of the following:

•Install the specified tray: 1 Turn the printer off.

2 Unplug the power cord from the wall outlet.

3 Install the specified tray.

4 Connect the power cord to a properly grounded electrical outlet. 5 Turn the printer back on.

•Cancel the print job.

Load [paper source] with [custom type name]

Try one or more of the following:

•Load the tray or feeder with the correct paper type and size.

•From the printer control panel, touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it prints from the default paper source.

•Cancel the print job.

Load [paper source] with [custom string]

Try one or more of the following:

•Load the tray or feeder with the correct paper type and size.

•From the printer control panel, touch Paper loaded, continue to clear the message and continue printing.

If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the printer cannot find a tray with the correct paper type and size, then it prints from the default paper source.

•Cancel the print job.