Proxim AP-700 System Parameters, Name Type Value Access CLI Parameter, Set sysresettodefaults

Command Line Interface (CLI)	AP-700 User Guide
Parameter Tables

System Parameters

	Name	Type	Value	Access	CLI Parameter
	System	Group	N/A	R	system
	Name	DisplayString	User Defined	RW	sysname
	Location	DisplayString	User Defined	RW	sysloc
	Contact Name	DisplayString	User Defined	RW	sysctname
	Contact E-mail	DisplayString	User Defined	RW	sysctemail
	Contact Phone	DisplayString	User Defined	RW	sysctphone
			max 254 characters
	FLASH Backup Interval	Integer	0 - 65535 seconds	RW	sysflashbckint
	Flash Update		0	RW	sysflashupdate
			1
	System OID	DisplayString	N/A	R	sysoid
	Descriptor	DisplayString	System Name, flash	R	sysdescr
			version, S/N, bootloader
			version
	Up Time	Integer	dd:hh:mm:ss	R	sysuptime
			dd - days
			hh - hours
			mm - minutes
			ss - seconds
	Emergency Restore to		Resets all parameters to	RW	sysresettodefaults
	defaults		default factory values		Note: You must enter the
					following command twice to
					reset to defaults:
					set sysresettodefaults 1
Inventory Management Information
	Name	Type	Value	Access	CLI Parameter
	System Inventory	Subgroup	N/A	R	sysinvmgmt
	Management
	Component Table	Subgroup	N/A	R	sysinvmgmtcmptbl
	Component Interface	Subgroup	N/A	R	sysinvmgmtcmpiftbl
	Table

NOTE: The inventory management commands display advanced information about the AP’s installed components. You may be asked to report this information to a representative if you contact customer support.

176