802.11b Only Parameters, 802.11b/g Only Parameters | Proxim AP-700

Command Line Interface (CLI)						AP-700 User Guide
Parameter Tables

802.11b Only Parameters

	Name	Type		Value	Access	CLI Parameter
	Operating Frequency	Integer	1	- 14; available	RW	channel
	Channel		channels vary by
			regulatory
			domain/country; see
			Available Channels
	Multicast Rate	Integer	1	Mbits/sec (1)	RW	multrate
			2	Mbits/sec (2) (default)
			5.5 Mbits/sec (3)
			11 Mbits/sec (4)
	Closed Wireless System	Integer	enable		RW	closedsys
			disable (default)
	MAC Address	PhyAddress	12 hex digits		R	macaddr
	Supported Data Rates	Octet String	1	Mbits/sec	R	suppdatarates
			2	Mbits/sec
			5.5 Mbits/sec
			11 Mbits/sec
	Transmit Rate	Integer32	0	(auto fallback; default)	RW	txrate
			1	Mbits/sec
			2	Mbits/sec
			5.5 Mbits/sec
			11 Mbits/sec
	Physical Layer Type	Integer	dsss (direct sequence		R	phytype
			spread spectrum) for
			802.11b
	Regulatory Domain List	DisplayString	U.S./Canada -- FCC		R	regdomain
			Europe -- ETSI
			Japan -- TELEC
802.11b/g Only Parameters

	Name	Type		Value	Access	CLI Parameter
	Wireless Operational	Integer	dot11b-only		RW	mode
	Mode		dot11g-only
			dot11bg (default)
	Operating Frequency	Integer	1	- 14; available	RW	channel
	Channel		channels vary by
			regulatory
			domain/country; see
			Available Channels
	Supported Data Rates	Octet String	See Transmit Rate,		R	suppdatarates
			below

182

Image 182

Proxim AP-700 manual 802.11b Only Parameters, 802.11b/g Only Parameters, 182

Contents

ORiNOCO AP-700 Access Point User Guide OpenSSL License Note CopyrightTrademarks AP-700 User Guide Contents Contents AP-700 User Guide Management Monitoring CommandsTroubleshooting Command Line Interface CLI General Notes Technical Support Ascii Character Chart C SpecificationsStatement of Warranty Regulatory Compliance AP-700 User Guide Document Conventions Introduction to Wireless NetworkingIntroduction Introduction AP-700 User Guide Ieee 802.11 SpecificationsGuidelines for Roaming HTTP/HTTPS Interface Command Line InterfaceManagement and Monitoring Capabilities SNMPv3 Secure Management Snmp ManagementSSH Secure Shell Management Page Overview Installation and InitializationAP-700 Hardware Description External Antennas Installation and Initialization AP-700 User GuideAntennas LED Indicators Active Ethernet Prerequisites Installation and Initialization AP-700 User Guide Product Package System Requirements Cabling the AP-700 Hardware InstallationRequired Materials Mounting the AP-700 to a Ceiling Installing the Security CoverMounting the AP-700 Installing External Antennas AP-700 Mounting Plate Mounting the AP-700 to a Wall Installing the AP in a Plenum Opening the Antenna Compartment ScanTool Instructions Using ScanToolInitialization Scan List Logging Click LAN SettingsEnter Network Password screen appears Select Tools Internet Options Using the Setup Wizard 11 System Status Screen 12 Setup Wizard Setup Wizard Instructions Installing the Software Install Software with Http Interface Click Commands Update AP via Http Click Commands Reboot Install Software with Tftp Server Install Updates from your Tftp Server using the CLI Related Topics System Status System Status Screen Advanced Configuration Advanced Configuration AP-700 User Guide Configure Main Screen System Dynamic DNS SupportPage IP Configuration Network Advanced Dhcp ServerDNS Client Comment optional Advanced Configuration AP-700 User Guide NetworkStart IP Address End IP Address Dhcp Relay Agent Dhcp Relay Agent Dhcp Server IP Address Table Link Integrity Target IP Address Comment optional Link Integrity Configuration Screen Sntp Simple Network Time Protocol Sntp Configuration Screen Advanced Configuration AP-700 User Guide Network Operational Mode Interfaces Configuring 802.11d Support Advanced Configuration AP-700 User Guide InterfacesSuper Mode and Turbo Mode Ieee 802.11d Support for Additional Regulatory Domains TX Power Control/Transmit Power Level Configuring TX Power Control Wireless 802.11a/b/g Radio 10 Wireless InterfacePage Dynamic Frequency Selection/Radar Detection DFS/RD Affected Countries Wireless Service Status RTS/CTS Medium Reservation Set Blacklist Status to Enable Traps Generated During Wireless Service Shutdown and ResumeClick on Configure Interfaces Wireless Channel Blacklist Table 13 WDS Example Bridging WDS WDS Setup Procedure 14 WDS Configuration Ethernet 15 Adding WDS Links 16 Ethernet Sub-tab Passwords Management Secure Management IP Access TableServices Http Access Advanced Configuration AP-700 User Guide ManagementSnmp Settings Https Access Secure Socket Layer 17 Management Services Configuration Screen SSH Clients SSH Session SetupConfiguring SSH Click Commands Update AP via Http or via Tftp Uploading Externally Generated Host Keys Serial Configuration Settings Radius Based Management Access Set up Automatic Configuration for Static IP Automatic Configuration AutoConfigAuto Configuration and the CLI Batch File 19 Automatic Configuration Screen Set up Automatic Configuration for Dynamic IP Hardware Configuration Reset Chrd 20 Dhcp Options Setting the Boot Server Host Name Click Configure Management Chrd Configuration Reset via Serial Port During BootupConfiguring Hardware Configuration Reset Procedure to Reset Configuration via the Serial Interface Static MAC FilteringEthernet Protocol Select the Filter Operation Type Advanced Configuration AP-700 User Guide Filtering Wired MAC Address Wired MAC Address 0040F41CDB6AWireless MAC Address 00022D5194E4 Wireless MAC Address 0020A6124E38 Number AdvancedTCP/UDP Port Click Add under the TCP/UDP Port Filter Table heading Editing TCP/UDP Port Filters Click Edit under the TCP/UDP Port Filter Table heading Alarms Groups Security Trap Group Trap Name Description Severity Level Operational Trap Group Trap Name Description Severity Level Trap Name Description Severity Level Flash Memory Trap Group Trap Name Description Severity Level Image Trap Group Trap Name Description Severity Level Alarm Host TableTftp Trap Group Trap Name Description Severity Level Sntp Trap Group Trap Name Description Severity Level Advanced Configuration AP-700 User Guide Alarms Event Priority Description Configuring Syslog Event NotificationsSyslog Syslog Messages Syslog Message Name Priority Severity Description Advanced Configuration AP-700 User Guide Rogue Scan 25 Preventing Rogue AP Attacks Multi-Band Scanning Continuous Scanning ModeBackground Scanning Mode Rogue Scan Data Collection Click Configure Alarms Rogue Scan Rogue Scan 26 Rogue Scan Screen Bridge Spanning Tree Advanced Configuration AP-700 User Guide Bridge Storm Threshold Packet Forwarding Configuring Interfaces for Packet ForwardingIntra BSS QoS Wireless Multimedia Extensions WME/Quality of Service QoSClick Configure QoS Policy Enabling QoS and Adding QoS policies Advanced Configuration AP-700 User Guide QoS Enter the Priority Mapping Index Click Configure QoS Priority Mapping Priority Mapping Enhanced Distributed Channel Access Edca STA Edca Table and AP Edca Table 32 Edca Tables Advanced Configuration AP-700 User Guide QoS Radius Servers per Authentication Mode and per Vlan Radius Profiles Configuring Radius Profiles Radius Servers Enforcing Vlan Access Control Advanced Configuration AP-700 User Guide 35 Add Radius Server Profile Radius Accounting MAC Access Control Via Radius Authentication802.1x Authentication using Radius 101 Authentication AttributesAccounting Attributes 102 103 SSID/VLAN/SecurityVlan Overview 104 Click Configure SSID/VLAN/Security Mgmt Vlan Typical User Vlan ConfigurationsControl Access to the AP Management Vlan Security Profile Provide Access to a Wireless Host in the Same WorkgroupDisable Vlan Tagging Wi-Fi Protected Access WPA/802.11i WPA2 Advanced Configuration AP-700 User Guide SSID/VLAN/SecurityAuthentication Process 107 Authentication Protocol Hierarchy 108 VLANs and Security Profiles Configuring Security ProfilesClick Configure SSID/VLAN/Security Security Profile 109 802.1x Station Non Secure StationWEP Station WPA Station 111 40 Security Profile Table Add Entries 112 113 MAC AccessWireless Configuring an SSID/VLAN with Vlan Tagging Disabled 114 43 SSID/VLAN Edit Entries Screen Vlan Tagging Disabled 115 116 Configuring SSID/VLANs with Vlan Tagging EnabledClick SSID/VLAN/Security Wireless 45 SSID/VLAN Edit Entries Screen Vlan Tagging Enabled 117 Broadcast Ssid and Closed System 118 Monitoring 119 Version Monitoring AP-700 User Guide IP/ARP Table Icmp Monitoring Tab Learn Table Learn Table Monitoring Tab Radius 124 Monitoring AP-700 User Guide Interfaces 125 126 Station Statistics 127 Monitoring AP-700 User Guide Station Statistics 128 129 CommandsIntroduction to File Transfer via Tftp or Http Http File Transfer Guidelines Image Error Checking During File TransferTftp File Transfer Guidelines 130 Commands AP-700 User Guide Update APUpdate AP via Tftp 131 132 Update AP via HttpCommands AP-700 User Guide Update AP via Http Retrieve File via Tftp Commands AP-700 User Guide Retrieve FileRetrieve File 133 Retrieve File via Http 134 Retrieve File via Http Command Screen Commands AP-700 User Guide Reboot RebootReset 13 Help Link Configuration Screen 137 Help Link Symptoms and Solutions TroubleshootingTroubleshooting Concepts Connectivity Issues Basic Software Setup and Configuration Problems Client Connection Problems Vlan Operation Issues Active Ethernet AE Forced Reload Procedure Recovery ProceduresReset to Factory Default Procedure Preparing to Download the AP Image Download a New Image Using ScanToolDownload Procedure 143 Download a New Image Using the Bootloader CLI 144 Hardware and Software Requirements Setting IP Address using Serial PortInitializing the IP Address using CLI Attaching the Serial Port Cable Tftp Server Radius Authentication ServerRelated Applications 146 Troubleshooting AP-700 User Guide Related Applications 147 Prerequisite Skills and Knowledge Command Line Interface CLIGeneral Notes Notation Conventions CLI Error Messages Navigation and Special Keys Command Line Interface CLI AP-700 User Guide Command Line Interface CLI VariationsBootloader CLI 150 Example 1. Display Command list CLI Command TypesOperational CLI Commands Example 3a. Display every parameter that can be changed Example 2. Display specific CommandsExample 3. Display parameters for set and show Done, exit, quit Example 3b. Display parameters based on letter sequenceExample 4. Display Prompts for Successive Parameters Download Passwd HelpHistory 154 Search Parameter Control CommandsShow CLI Command 155 Set and show Command Examples Set CLI CommandConfiguring Objects that Require Reboot Examples Example 2 Create a table entry or row Example 1 Set the Access Point IP Address ParameterExample 4 Enable, Disable, or Delete a table entry or row Example 3 Modify a table entry or row 158 Example 5 Show the Group ParametersExample 6 Show Individual and Table Parameters Working with Tables Using Tables and StringsUsing Strings 159 Log into the AP using HyperTerminal Configuring the AP using CLI commandsSet Basic Configuration Parameters using CLI Commands Log into the AP using Telnet Set System Name, Location and Contact Information Change PasswordsSet Network Names for the Wireless Interface 161 Country Code 162 Configure SSIDs Network Names, VLANs, and Profiles 163 Backup your AP Configuration File Other Network SettingsDownload an AP Configuration File from your Tftp Server Set up Auto Configuration Configure the AP as a Dhcp Server Configure the DNS Client Autochannel Select ACS Operational ModeEnable/Disable Closed System Enable/Disable Turbo Mode 802.11a/g only Shutdown/Resume Wireless ServiceEnable/Disable Super Mode 802.11a/g only Configure Antenna Diversity Set Communication Ports Edit Management IP Access TableConfigure Management Ports Configure Serial Port Interface Configure Secure Socket Layer HttpsSet Telnet Session Timeouts 169 Setup MAC Address Access Control Create/Enable WDSEnable/Disable WDS Add an Entry to the MAC Access Control Table Figure A-17 Result of showradiustbl CLI Command 171 Add a Entry to the Wifssid Table Enable Vlan ManagementDisable Vlan Management CLI Monitoring Parameters Parameter Tables 174 Filtering Parameters 175 System Parameters Name Type Value Access CLI ParameterSet sysresettodefaults 176 Network Parameters DNS Client for Radius Name ResolutionDhcp Server Parameters Name Type Value Access CLI Parameter 177 Dhcp Relay Server Table Dhcp Server table for IP poolsDhcp Relay Group 178 179 Sntp Parameters Name Type Value Access CLI ParameterLink Integrity IP Target Table Common Parameters to 802.11a/b/g Wireless Interface ParametersInterface Parameters 180 802.11a Only Parameters 181 182 802.11b Only Parameters802.11b/g Only Parameters For 802.11b-only For 802.11g-only modeFor 802.11b/g mode Mode Channel Blacklist Parameters Wireless Distribution System WDS ParametersWireless Interface SSID/VLAN/Profile Parameters 184 Management Parameters Wireless Distribution System WDS Security Table ParametersSnmp Parameters Name Type Value Access CLI Parameter 185 186 187 Http Parameters Name Type Value Access CLI ParameterTelnet Parameters Name Type Value Access CLI Parameter SSH Parameters Serial Port Parameters Name Type Value Access CLI ParameterRadius Based Management Access Parameters 188 189 IP Access Table ParametersTftp Server Parameters 190 Filtering ParametersEthernet Filtering Table TCP/UDP Port Filtering Table Proxy ARP Parameters Name Type Value Access CLI ParameterTCP/UDP Port Filtering 191 Snmp Table Host Table Parameters Alarms ParametersName Type Value Access CLI Parameter Syslog Group 192 Syslog Parameters Syslog Host Table 193 194 Bridge ParametersSpanning Tree Priority and Path Cost Table Packet Forwarding Parameters Storm Threshold TableIntra BSS Subscriber Blocking 195 General Radius Parameters Radius Server Configuration ParametersRadius Parameters 196 MAC Access Control Table Security Parameters 198 VLAN/SSID ParametersSecurity Profile Table Configuring QoS Policies Iapp Parameters Name Type Value Access CLI ParameterEnabling QoS Name Type Value Access CLI Parameter Other Parameters Specifying the Mapping between 802.1p and 802.1D Priorities 200 201 Defining the QoS Policy used for a Wireless Interface SsidCLI Batch File CLI Batch File Format and Syntax Auto Configuration and the CLI Batch FileReboot Behavior CLI Batch File Error Log 203 Charact Equival Ent 204 Ascii Character ChartHex Number of Stations per BSS SpecificationsSoftware Features Management Functions Advanced Bridging Functions Medium Access Control MAC FunctionsSpecifications AP-700 User Guide Software Features Security Functions 207 Specifications AP-700 User GuideNetwork Functions Hardware Specifications 802.11b/g 802.11a Mode Frequency Channel Product SKU BandAvailable Channels Upper 149 153 157 161 ISM Band 165 210 RF Performance802.11a RF Performance 802.11a Data Rates Mbps Software and Documentation Downloads Knowledgebase 211 Technical SupportOnline Support International 212 Telephone SupportTechnical Support AP-700 User Guide Telephone Support Repair or Replacement Statement of WarrantyWarranty Coverage Limitations of Warranty Search Knowledgebase Ask a Question or Open an IssueOther Information Other Adapter Cards 215 Regulatory ComplianceProduct Model Numbers 216 Safety Information USA, Canada, & European UnionRegulatory Compliance AP-700 User Guide Federal Communications Commission FCC 217 Modifications 218 Industry Canada IC 219 European Union 220 221 Regulatory Compliance Certifications SummaryCountry Certification/Reference No