English
To change the transmittable signals for operating another manufacturer’s VCR
1.Press and hold VCR 
.
2.Press VCR.
3.Enter manufacturer’s code using buttons
and 0.
See the list on the right column to find the code.
4. Release VCR 
.
The following buttons can be used for operating a VCR:
VCR 
: Turn on and off a VCR.
After pressing VCR, you can perform the following operations on a VCR:
CH
1 – 10/0, 0, 100+ (+10):
| Select the TV channels. |
| The 10/0 button will function as the ENTER |
| button if your VCR requires pressing ENTER |
| after selecting a channel number. |
3: | Start playback. |
REW: | Rewind a tape. |
FF:Fast wind a tape.
7:Stop playing or recording.
8:Pause playing. To resume, press 3.
REC PAUSE: Enter recording pause by pressing this button. To start recording again, press this button then 3.
5. Try to operate your VCR by pressing VCR 
.
When your VCR turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
| For VCR |
|
|
Manufacturer | Codes |
JVC | 00*, 26, 27, 28, 29, 58 |
Aiwa | 01, 02 |
Bell & Howell | 03 |
Blaupunkt | 04, 05 |
CGM | 06, 07 |
Emerson | 08, 10, 11, 12, 64, 65 |
Fisher | 03, 14, 15, 16, 17 |
Funai | 01 |
GE | 18, 19, 20 |
Goldstar | 07 |
Goodmans | 13, 21 |
Grundig | 06, 22 |
Hitachi | 18, 23, 24, 25, 66 |
Loewe | 07, 21 |
Magnavox | 04, 19, 24 |
Mitsubishi | 30, 31, 32, 33, 34, 35 |
NEC | 26, 27 |
Nokia | 03, 36 |
Nordmende | 38 |
Orion | 09 |
Panasonic | 19, 24, 39, 40 |
Philips | 04, 19, 21, 24, 41, 42 |
Phonola | 21 |
RCA/Proscan | 04, 18, 19, 23, 24, 43, 44, 45 |
SABA | 38, 46 |
Samsung | 45, 47, 59, 61, 62, 63 |
Sanyo | 03, 48, 49 |
Sharp | 37, 50 |
Siemens | 03, 51 |
Sony | 52, 53, 54 |
Telefunken | 55, 60 |
Toshiba | 43, 44 |
Zenith | 56, 57 |
*Initial setting
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
47
