English
Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, DBS tuners, VCRs and DVD players.
When operating the other manufacturers’ components, refer also to the manuals supplied with them.
•After replacing batteries for the remote control, you need to set the manufactures’ codes again.
To change the transmittable signals for operating another manufacturer’s TV
1.Press and hold TV 
.
2.Press TV/DBS.
3.Enter a manufacturer’s code using buttons 1 – 9,
and 0.
See the list on the right column to find the code.
4. Release TV 
.
The following buttons can be used for operating a TV:
TV 
: Turn on and off the TV.
TV VOL
TV/VIDEO: Set the input mode (either TV or VIDEO).
After pressing TV/DBS, you can perform the following operations on a TV:
CH
1 – 10/0, 0, 100+ (+10):
Select the channels.
The 10/0 button will function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.
Notes:
•All the functions listed above may not be assigned to the buttons for some TVs.
•If you cannot change the channels of some TVs by pressing 10 keys, press CH +/– for changing the channels.
For TV
Manufacturer | Codes | Manufacturer | Codes |
JVC | 00*, 02, 13, | Quelle | 52, 53, 54, 55, |
| 14, 47, 74 |
| 56, 57, 58, 59, |
Akai | 01, 02 |
| 60, 61, 62, 63, |
Blaupunkt | 03, 04 |
| 64, 65, 66, 67 |
Fisher | 01, 05 | RCA/ | 08, 24, 29, 30, |
Grundig | 03, 06, 07 | Proscan | 31, 48 |
Hitachi | 08, 09, 10, 49 | SABA | 32, 33, 68, 69, |
Irradio | 02 |
| 70 |
ITT/NOKIA | 11, 12 | Samsung | 06, 08, 16, 34, |
Loewe | 06, 15, 16 |
| 35, 49 |
Magnavox | 08, 17, 49 | Sanyo | 01, 05 |
Mets | 50, 51, 52, 53 | Schneider | 02, 15, 36 |
Mitsubishi | 08, 18, 19, 20 | Sharp | 37, 38, 77 |
Mivar | 21 | Sony | 39 |
Nordmende | 22, 23 | Telefunken | 40, 41, 42, 69 |
Okano | 15 | Thomson | 71, 72 |
Panasonic | 24, 25, 26, 27 | Toshiba | 37, 43, 44 |
| 76 | Zenith | 45, 46 |
Philips | 15, 17, 28, 75 |
|
|
*Initial setting
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
5. Try to operate your TV by pressing TV 
.
When your TV turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
45
