Example D-4 help cpuconfig command

Shell> help cpuconfig

CPUCONFIG [cpu] [on off]

cpu Specifies which cpu to configure

on off Specifies to configure or deconfigure a cpu

Notes:

1. Cpu status will not change until next boot

Examples:

*To deconfigure CPU 0 fs0:\> cpuconfig 0 off

CPU will be deconfigured on the next boot

*To display configuration status of cpus fs0:\> cpuconfig

<CPU configuration data displayed>

Example D-5 help ioconfig command

Shell> help ioconfig

Deconfigure or reconfigure IO components or settings

IOCONFIG [fast_init wol [on off]]

fast_init

Specifies device connection policy setting

wol

Specifies System Wake-On-LAN setting

on off

Specifies to configure or deconfigure a feature or component

Note:

1.If fast_init is enabled, firmware will connect only the minimum set of devices during boot. This feature might cause boot failure; disable this feature if failure occurs.

2.Any pending Wake-On-LAN request will not be cleared until reboot if the setting is changed to disabled.

System will clear pending Wake-On-LAN requests each time the system reboots if the setting is disabled.

Examples:

*To display the current settings fs0:\> ioconfig

Fast initialization: Enabled

System Wake-On-LAN: Disabled

*To display the current device connection policy setting fs0:\> ioconfig fast_init

Fast initialization: Enabled

*To disable fast initialization fs0:\> ioconfig fast_init off Fast initialization: Disabled

*To enable the System Wake-On-LAN setting fs0:\> ioconfig wol on

System Wake-On-LAN: Enabled

baud

Sets the baud rate and communication settings for a universal asynchronous receiver-transmitter (UART).

322 Utilities