6.Power on the enclosure.

7.Power on the server.

SAS Cable Part Numbers

If you require additional cables, order them by the option kit number listed in Table 3-16.

Table 3-16

SAS Cable Part Numbers

 

 

 

 

 

Cable Length

 

Option Kit Number

Cable Assembly Number

 

 

 

 

1.0 m (3.3 ft.)

 

389664-B21

361317-001

 

 

 

 

2.0 m (6.6 ft.)

 

389668-B21

361317-002

 

 

 

 

4.0 m (13 ft.)

 

389671-B21

361317-004

 

 

 

 

6.0 m (20 ft.)

 

389674-B21

361317-006

 

 

 

 

SAUPDATE Utility

Use saupdate from the EFI Shell to update the firmware image on the HP Smart Array Controller. Command line options are described below. Follow one of these two procedures to run saupdate:.

•If you are using saupdate from the Offline Diagnostic CD:

1.Download the firmware and copy it to the EFI partition.

2.The CD containing saupdate.efi must be in the drive before booting the system to allow device mapping.

3.Boot the system to the EFI Shell prompt. The CD drive should appear in the list of mapped devices as fs0.

4.Change to this device by typing fs0: under EFI Shell prompt.

5.If the EFI utility and firmware image files are not located in the root directory, move to the directory in which these files are located, for example:

fs0: >cd EFI HP TOOLS IO_CARDS SmartArray

IMPORTANT: Both saupdate.efi and the firmware image file must be located in the same directory. If they are not, copy them both to the EFI partition. Run the saupdate.efi using the fs0: > saupdate command.

•If you are not using the Offline Diagnostic CD:

1.Download the SA EFI update utility saupdate.efi and copy it to the EFI partition.

2.Download the firmware and copy it to the EFI partition.

3.Boot the system to the EFI Shell and change directories to the EFI partition.

4.Run the saupdate.efi using the using the fs0:\> saupdate.efi command. The following screen displays. The version of the utility displays on the second line:

*************************************************************

Smart Array Offline Firmware Update Utility Version: 1.04.12.00

(C)Copyright 2004 Hewlett Packard Development Company L.P.

*************************************************************

Syntax

saupdate <operation> <parameters>

Commands

You can use the following operations with saupdate:

110 Installing the System