Ctrl[30] Primary Standard Error Device

Ctrl[1C] Acpi(HWP0002,700)/Pci(20)

Ctrl[32] Primary Console Output Device

Ctrl[30] Primary Standard Error Device

Ctrl[33] Acpi(PNP0501,0)

Ctrl[34] 16550 Serial UART Driver

Ctrl[35] VT-100+ Serial Console

Ctrl[31] Primary Console Input Device

Ctrl[32] Primary Console Output Device

Ctrl[30] Primary Standard Error Device

Ctrl[44] VenHw(904EFCF0-F0A8-11D4-B4CA-303031303833)

Ctrl[46] VenHw(D65A6B8C-71E5-4DF0-A909-F0D2992B5AA9)

This information describes the SCSI interface because the path on the first line, Acpi(HWP0002,100), is the path from the information displayed by the info io command. The next two lines describe the SCSI interface two channels, one line for each channel. The lines contain the SCSI interface description [LSI Logic Ultra160 SCSI Controller]. The value shown for Ctrl—17and 18 at the beginning of each line is the controller’s handle for each channel. You need this value for the next step.

NOTE: The controller’s handle values changes on every boot.

3.From the EFI Shell prompt, enter the following command to obtain the EFI driver’s handle for the SCSI interface:

Shell> drvcfg

A list of all EFI-capable configurable components in the system is displayed. For example:

Shell> drvcfg Configurable Components Drv[3D] Ctrl[15] Lang[eng] Drv[3F] Ctrl[19] Lang[eng] Drv[45] Ctrl[17] Lang[eng]

Drv[45] Ctrl[18] Lang[eng]

This listing shows which driver controls which device (controller). This information describes a SCSI interface because the values shown for Ctrl—17and 18 are the controller’s handles for the SCSI interface two channels (from the information displayed by the devtree command).

340 Utilities