Figure 6-6 Removing and Replacing a Hot-Swappable Power Supply

P1

P0

Rear Chassis View

Replacing a Hot-Swappable Power Supply

To replace a hot-swappable power supply, follow these steps:

1.Remove the metal filler panel.

2.Support the new power supply with both hands, and slide it into the empty slot until it clicks into place (Figure 6-6).

IMPORTANT: Ensure the power supply is flush with the adjacent power supply or metal filler panel.

3.Plug the power cord into the power supply receptacle.

NOTE: The LED immediately turns on when power is applied.

4.Replace the cable management arm.

Removing and Replacing a Hot-Swappable Power Supply 187