Figure
0C 1C 2C
0D
1D
2D
0A
1A
2A
0B
1B
2B
Memory Loading Rules and Guidelines
Use the following rules and guidelines when installing memory:
•Install DIMMs in pairs in the
•Ensure all DIMMs within a pair or quad are identical.
•Install quads in order of capacity from largest to smallest. For example, install all 2 GB quads before 1 GB or smaller quads, and install all 1 GB quads before 512 MB quads.
•Side 0 must have equal or greater memory capacity than side 1.
•Install DIMM pairs or quads based on the following rules:
1.Load pairs or quads into the memory carrier in order, starting with slot 0 and ending with slot 2.
2.Install the first pair or quad in side 0.
3.Install the second pair or quad in side 1.
4.For the remaining pairs or quads:
a.If both sides of the memory carrier contain the same capacity of memory, install the next pair or quad in side 0.
b.If side 0 contains more memory capacity than side 1, install the next quad in side 1.
c.If side 1 is full, install the remaining quads in side 0.
Table
Removing and Replacing the Memory Carrier Assembly 211