Figure 6-11 DVD Drive Removal and Replacement

DVD Release

Hole

Front Chassis View

Replacing the DVD Drive

To replace a DVD drive, follow these steps:

1.Insert the DVD drive, and push it straight into the drive bay until it clicks into place (Figure 6-11).

2.Reconnect the power cables and power on the server. See “Powering On the Server” (page 94).

Removing and Replacing the Memory Carrier Assembly

The memory carrier assembly encloses the system DIMMs. There are two different memory carrier assemblies available for this server:

•8-DIMM memory carrier assembly

•24-DIMM memory carrier assembly

The 8- and 24-DIMM memory carrier assemblies have two sides, 0 and 1, each of which contain a memory board. System DIMMs seat onto the memory boards.

Table 6-4lists the supported memory carrier assembly configurations.

Table 6-4 Supported Memory Carrier Assembly Configurations

Memory Carrier Configuration

Memory Boards Installed

 

 

8-DIMM memory carrier

Two 4-DIMM memory boards

 

 

24-DIMM memory carrier

Two 12-DIMM memory boards

 

 

Removing and Replacing the Memory Carrier Assembly 203