HP INTEGRITY RX3600 manual Manage Array Screen

	Wrg Type	Device is not compatible for use as part of an IM
		array.
	Too Small	Disk is too small to mirror existing data.
	Max Dsks	Maximum # of disks allowed for this type of Array
		reached and/or Maximum # of total IM disks on a
		controller reached.
	No SMART	Disk doesn't support SMART, cannot be used in
		an RAID array.
	Wrg Intfc	Device interface (SAS) differs from existing IM
		disks.
Pred Fail	Indicates whether device SMART is predicting device failure (Yes,
	No).
Size(MB)	Indicates the size of the device in megabytes (megabyte = 1024 x 1024
	= 1,048,576). If the device is part of a two-disk array, this field reflects
	the size of the array, not the size of the individual disk. If the device

is part of a three or more disk array, this field is the size that the disk makes up within the array. When creating a striped array, the usable size of the array is determined by the number of drives times the size of the smallest drive in the array. In arrays consisting of different sized drives, excess space on larger drives are unusable.

Manage Array Screen

The Manage Array screen enables you to manage the current array. To access the Manage Array screen, select the appropriate field and press Enter on the Manage Array field from the View Array screen.

The Manage Array screen enables you to perform the following actions:

Manage Hot Spare

To display a Hot Spare Management screen that has the same layout as the Create New Array screen, press Enter on Manage Hot Spare. This field is grayed out under the following conditions:

•The array is inactive.

•The array is at its maximum number of devices.

•Non-IR firmware is used.

•IR is disabled. The array is inactive.

Synchronize Array

To perform a synchronization of the IM array, press Enter on Synchronize Array. The screen prompts you to ask if you want to perform this action. Press Y for yes or N for no. This field is grayed out under the following conditions:

•The array is inactive.

•The array does not need to be resynchronized.

•The adapter's MPT firmware does not support the feature

•Non-IR firmware is used.

•IR is disabled. The array is inactive.

Activate Array

To perform an activation of an IM array, press Enter on Activate Array. The screen prompts you to ask if you want to perform this action. Press Y for yes or N for no.

Core I/O Card Configuration 105